RE: Three-homed DMZ

Hi MIchele,
You dont have to use public IP's on the DMZ interfaces... they can be
set to use the NAT on the outside interface of the ISA. 

-----Original Message-----
From: Michele Taverna [mailto:michele.taverna@xxxxxxxxxxxxx]
Sent: Thursday, November 29, 2001 1:16 PM
To: [ISAserver.org Discussion List]
Subject: [isalist] Three-homed DMZ


http://www.ISAserver.org


Hi all,

I've a simple question about ISA Server NICs configuration on
three-homed
DMZ.
I understood I've to use public IP on DMZ segment, ok. But the nic which
connect my ISA Server machine to DMZ network, must have public IP too?

For example, take a look at this ISA Server's interface IP config...

Internet : 123.123.123.200
Subnet   : 255.255.255.248

Local    : 10.10.10.1
Subnet   : 255.255.255.0

DMZ      : 123.123.123.201
Subnet   : 255.255.255.248

So, I've to use 2 public IP address on my ISA Server machine?
Are there alternatives?

Thank you.

Michele Taverna - Italy


------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
syed.muqeem@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')

Other related posts: