If you have ISA installed in Firewall or Integrated mode, you have a NAT editor installed. You should see no "NAT" entries in any interface properties with ISA installed. If you do, disable RRAS and reinstall it using ONLY THE ISA WIZARDS. Jim Harrison MCP(NT4, W2K), A+, Network+, PCG http://isaserver.org/authors/harrison/ Read the books! ----- Original Message ----- From: "mike" <mbailoux@xxxxxxxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Sent: Monday, January 28, 2002 09:29 Subject: [isalist] Re: SecurNAT outbound access http://www.ISAserver.org Hey Jim I checked the nic bindings and they are set as internal - external - RRAS. I do not have any extra subnets in the routes, but I do have one question. Are there supposedto be NAT entries under the interfaces. As far as I can see I do not have any NAT protocols installed, but when I right-click on an int. in RRAS and check the NAT there is an entry, is this normal, and if not how do I get rid of it. Thanks Mike ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: jim@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')