Re: Publishing Rules

From: "Mark Strangways" <strangconst@xxxxxxxx>
To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
Date: Mon, 30 Jul 2001 19:28:31 -0400
Well,

If you are using ISA Server to publish Web servers and other servers, making 
them available to Internet clients, you must obtain one or more static IP 
addresses in addition to registering your domain names. Internet users will 
access your internal servers by accessing these IP addresses or names.

If you have registered an Internet domain name, you may decide to have your 
Internet service provider handle the details of how to administer the listing 
of your domain name in DNS for use by others on the Internet.

When you publish internal servers, you must obtain static IP addresses with 
which to associate the domain or server name. When external clients access your 
web site or domain, local server, the ISP's DNS name resolution server will 
find the IP address associated with the requested Web site name server-usually 
an IP address on your ISA Server or on a perimeter network (also known as a 
DMZ, demilitarized zone, and screened subnet).

Alternatively, you can use an internal DNS server to resolve requests from 
external clients. This DNS server should be published like any other published 
server. For more information, see Server publishing rules.



I guess they could be :(

perhaps you could put a router or something in front of the isa to translate 
dynamic ip's to static ones... What do you think ... Jim ?

regards,

Mark

  ----- Original Message ----- 
  From: Mark Strangways 
  To: [ISAserver.org Discussion List] 
  Sent: Monday, July 30, 2001 7:24 PM
  Subject: [isalist] Re: Publishing Rules


  http://www.ISAserver.org


  Good point, there must be a solution to that . Microsoft wouldn't be THAT 
close minded, would they ?

  Regards

  Mark
    ----- Original Message ----- 
    From: Mike 
    To: [ISAserver.org Discussion List] 
    Sent: Monday, July 30, 2001 7:07 PM
    Subject: [isalist] Publishing Rules


    http://www.ISAserver.org


    Does anyone know why Microsoft decided not to allow you to select the 
external interface versus the actual IP address in the publishing server rules. 
If you receive your IP DHCP, and the IP address changes then none of your 
publishing rules will work.
     
    Any work arounds?
     
    Mike CLow
    ------------------------------------------------------
    You are currently subscribed to this ISAserver.org Discussion List as: 
strangconst@xxxxxxxx
    To unsubscribe send a blank email to $subst('Email.Unsub') 
  ------------------------------------------------------
  You are currently subscribed to this ISAserver.org Discussion List as: 
strangconst@xxxxxxxx
  To unsubscribe send a blank email to $subst('Email.Unsub')
Re: Publishing Rules

Other related posts:
