RE: Publishing Exchange Server - Weird Problem

Exactly.  Same scenario here.  But give a look at Q290113 (as mentioned
below).  Microsoft seems to suggest that you should use both.  I dont think
that is technically possible.

As others have pointed out in past emails, web publishing provides better
protection against Nimda, Code Red, etc, then does server publishing.



----- Original Message -----
From: "Mike Carlson" <domitianx@xxxxxxxxxxxxx>
To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
Sent: Friday, November 30, 2001 8:17 AM
Subject: [isalist] RE: Publishing Exchange Server - Weird Problem


http://www.ISAserver.org


I only created the Server publishing rule. I did not use the Web
publishing rule for OWA SSL and I have no problems.

Since I have OWA setup to only accept SSL 128 bit encryption, there is
no need for web publishing. I tried using the web publishing with SSL
and it did not work. I always got prompted for a username.

Web publishing worked great when I had OWA setup to NOT use SSL.

One or the other, I wouldn't think both would work very well.

********************
Mike Carlson
http://www.domitianx.com
domitianx@xxxxxxxxxxxxx
********************

-----Original Message-----
From: Work [mailto:wit@xxxxxxxxxx]
Posted At: Friday, November 30, 2001 12:35 AM
Posted To: ISALists
Conversation: [isalist] RE: Publishing Exchange Server - Weird Problem
Subject: [isalist] RE: Publishing Exchange Server - Weird Problem


http://www.ISAserver.org


So you have to create web publishing rule AND server publishing rule?  I
have just server publishing rule for SSL OWA, and it works fine without
web pub rule.  What does using both get me?


> ----- Original Message -----
> From: "Jim Harrison" <jim@xxxxxxxxxxxx>
> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
> Sent: Friday, November 30, 2001 1:04 AM
> Subject: [isalist] RE: Publishing Exchange Server - Weird Problem
>
>
> > http://www.ISAserver.org
> >
> >
> > It's both.  ISA-WEB publishing and OWA-SSL don't like each other
> > very
> much.
> > That's why the server-published SSL.
> >
> > Jim Harrison
> > MCP(NT4, W2K), A+, Network+, PCG
> > http://isaserver.org/authors/harrison/
> >
> > ----- Original Message -----
> > From: "Work" <wit@xxxxxxxxxx>
> > To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
> > Sent: Thursday, November 29, 2001 21:36
> > Subject: [isalist] RE: Publishing Exchange Server - Weird Problem
> >
> >
> > http://www.ISAserver.org
> >
> >
> > I have experienced same problems with web publishing SSL, and have
always
> > used server publishing; though web publishing is recommended as more
> secure
> > against IIS attacks.
> >
> > In Q290113, MS seems to be saying that you should publish OWA with
> > web
AND
> > with server publishing rules. (see 1st paragraph after step 3: says
"must
> > ALSO create....").
> >
> > I figure it's one or the other.  Can anyone explain this?
> >
> >
> >
> >
> >  ----- Original Message -----
> > > From: "Mike Carlson" <domitianx@xxxxxxxxxxxxx>
> > > To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
> > > Sent: Thursday, November 29, 2001 11:21 PM
> > > Subject: [isalist] RE: Publishing Exchange Server - Weird Problem
> > >
> > >
> > > http://www.ISAserver.org
> > >
> > >
> > > http://www.freessl.com
> > >
> > > Free SSL certificates good for 1 year. After the first year you
> > > have
to
> > > pay.
> > >
> > > I have been using one for months with OWA and SSL and it works
> > > fine.
> > >
> > > I can provide more details if you want on how to implement the
> > > certificate if you have enver done so. There is nothing special
> > > with
the
> > > FreeSSL certificate though.
> > >
> > > Also, do not use the Web Server publishing rules to publish SSL,
> > > use
the
> > > Server Publishing Rule and select HTTPS protocol. I could not get
> > > it
to
> > > work with the Web Server Publishing.
> > >
> > > ********************
> > > Mike Carlson
> > > http://www.domitianx.com
> > > domitianx@xxxxxxxxxxx
> > > ********************
> > >
> > > -----Original Message-----
> > > From: WebMeister [mailto:webmaster@xxxxxxxxxxxxxxxxx]
> > > Posted At: Thursday, November 29, 2001 8:52 PM
> > > Posted To: ISALists
> > > Conversation: [isalist] RE: Publishing Exchange Server - Weird
> > > Problem
> > > Subject: [isalist] RE: Publishing Exchange Server - Weird Problem
> > >
> > >
> > > http://www.ISAserver.org
> > >
> > >
> > > Either, but if you use your own you have to get your users to
> > > accept untrusted certificates from their home pcs for you self
> > > generated certificate.  Verisign is on the list of pretrusted
> > > certs already in
the
> > > list in IE.
> > > -----Original Message-----
> > > From: Michael Ninkranz [mailto:miken05@xxxxxxxxxxx]
> > > Sent: Thursday, November 29, 2001 9:20 PM
> > > To: [ISAserver.org Discussion List]
> > > Subject: [isalist] RE: Publishing Exchange Server - Weird Problem
> > >
> > >
> > > http://www.ISAserver.org
> > >
> > >
> > > Bill, this is something I am looking at doing as well, but want to

> > > enforce SSL through OWA. Can I use Certificate Server for this or
> > > do I need an authentic 3rd party cert from Verisign etc?
> > >
> > > Your answer will define my weekend!
> > >
> > > Cheers,
> > > Mike
> > > ----- Original Message -----
> > > From: billsmith@xxxxxxxxxx
> > > To: [ISAserver.org Discussion List]
> > > Sent: Friday, November 30, 2001 3:13 PM
> > > Subject: [isalist] RE: Publishing Exchange Server - Weird Problem
> > >
> > >
> > > http://www.ISAserver.org
> > >
> > >
> > > Try Publishing the Server on the web server publishing and use
> > > OWA.
It
> > > work much nicer.
> > >  -----Original Message-----
> > > From:   Dave Morrow [mailto:David.Morrow@xxxxxxxxxxxx]
> > > Sent:   Thursday, November 29, 2001 9:40 AM
> > > To:     [ISAserver.org Discussion List]
> > > Subject:        [isalist] Publishing Exchange Server - Weird
Problem
> > > http://www.ISAserver.org
> > >
> > >
> > > I have this very strange problem with publishing an Exchange
> > > server behind ISAServer.
> > > I use the "Secure Mail Server" publishing wizard to publish my
Exchange
> > > server.  Everything works fine with respect to POP/SMTP but
> > > Outlook clients connecting to my server can only resolve their
> > > mailbox name (when they setup
> > > their profile).  When they launch Outlook it fails to connect to
the
> > > server.
> > > I know it can connect since it properly resolves the name and sets
up
> > > the
> > > profile.
> > > David A. Morrow
> > > Network Administrator
> > > Autodata Solutions Company
> > > David.Morrow@xxxxxxxxxxxx
> > > http://www.autodata.net <http://www.autodata.net>
> > > Phone: (519) 951-6067   Fax: (519) 451-6615
> > > This message has originated from Autodata Solutions Company. The
> > > attached
> > > material is the Confidential and proprietary Information of
Autodata
> > > Solutions Company. This email and any files transmitted with it
are
> > > confidential and intended solely for the use of the individual or
entity
> > > to
> > > whom they are addressed. If you have received this email in error
please
> > >
> > > delete this message and notify the Autodata system administrator
> > > at ADMINISTRATOR@xxxxxxxxxxxx
> > >
> > >
> > >
> > >
> > >
> > > ------------------------------------------------------
> > > You are currently subscribed to this ISAserver.org Discussion List

> > > as: billsmith@xxxxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')
> > >
> > > ------------------------------------------------------
> > > You are currently subscribed to this ISAserver.org Discussion List

> > > as: miken05@xxxxxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')
> > >
> > > ------------------------------------------------------
> > > You are currently subscribed to this ISAserver.org Discussion List

> > > as: webmaster@xxxxxxxxxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')
> > >
> > > ------------------------------------------------------
> > > You are currently subscribed to this ISAserver.org Discussion List

> > > as: isalists@xxxxxxxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')
> > >
> > >
> > > ------------------------------------------------------
> > > You are currently subscribed to this ISAserver.org Discussion List

> > > as: wit@xxxxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')
> > >
> >
> >
> > ------------------------------------------------------
> > You are currently subscribed to this ISAserver.org Discussion List
> > as: jim@xxxxxxxxxxxx To unsubscribe send a blank email to
> > $subst('Email.Unsub')
> >
> >
> >
> >
> > ------------------------------------------------------
> > You are currently subscribed to this ISAserver.org Discussion List
> > as:
> wit@xxxxxxxxxx
> > To unsubscribe send a blank email to
> > $subst('Email.Unsub')
>


------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
isalists@xxxxxxxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')

------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
wit@xxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')



Other related posts: