Hi Bill, Check out my article on Web Proxy clients and Direct Access over at www.isaserver.org/shinder It'll answer all your questions. HTH, Tom Thomas W Shinder www.isaserver.org/shinder ISA Server and Beyond: http://tinyurl.com/1jq1 Configuring ISA Server: http://tinyurl.com/1llp -----Original Message----- From: Bill Mayo [mailto:bemayo@xxxxxxxxxxxxx] Sent: Wednesday, February 19, 2003 12:32 PM To: [ISAserver.org Discussion List] Subject: [isalist] RE: Problem with outbound connection to secure site http://www.ISAserver.org Dr. Shinder, thanks again for the response. I went in and added the domain under the Direct Access tab of Web Browser properties. I have seen no change in the behavior. However, I am wondering if it is working as intended, as I would assume that I would be blocked from accessing the site until I did something at the hardware firewall level (by default, we only let out traffic coming from the ISA Server). Does direct access really indicate that the ISA Server is not used at all, or does it do something special where the ISA Server is still the originator of the message as far as the gateway (hardware firewall) is concerned? Do I need to do anything to make sure my browser is receiving this setting correctly? Bill Mayo > Hi Bill, > > Are they using an alternate port for SSL? Try bypassing the Web Proxy > service by using Direct Access to see if it's a problem with the Java > app.=20 > > Thanks! > Tom ------------------------------------------------------ List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ ------------------------------------------------------ Exchange Server Resource Site: http://www.msexchange.org/ Windows Security Resource Site: http://www.windowsecurity.com/ Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: tshinder@xxxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')