[isalist] Re: Point to Point VPN ISA 2006

  • From: Steve Moffat <steve@xxxxxxxxxx>
  • To: ISA Mailing List <isalist@xxxxxxxxxxxxx>
  • Date: Sun, 21 Oct 2007 11:55:35 -0300

http://www.ISAserver.org
-------------------------------------------------------

OK Smartass...:)

Go get a Linksys and see if you can get pptp through it "without" udp 500. They 
seem to use it no matter that it's ipsec.

S

-----Original Message-----
From: isalist-bounce@xxxxxxxxxxxxx [mailto:isalist-bounce@xxxxxxxxxxxxx] On 
Behalf Of Jim Harrison
Sent: Sunday, October 21, 2007 11:48 AM
To: ISA Mailing List
Subject: [isalist] Re: Point to Point VPN ISA 2006

http://www.ISAserver.org
-------------------------------------------------------

PPTP not use IPSec NAT-T, yanumptie...

Many NAT-based devices trash otherwise functional PPTP traffic.
If you get a network capture of the traffic at both sides of the "router", we 
can examineit or the common failure point (PeerID gets changed somewhere along 
the line).


-----Original Message-----
From: isalist-bounce@xxxxxxxxxxxxx [mailto:isalist-bounce@xxxxxxxxxxxxx] On 
Behalf Of Steve Moffat
Sent: Saturday, October 20, 2007 2:49 PM
To: ISA Mailing List
Subject: [isalist] Re: Point to Point VPN ISA 2006

Have you forwarded udp 500 through the Linksys??



S



From: isalist-bounce@xxxxxxxxxxxxx [mailto:isalist-bounce@xxxxxxxxxxxxx] On 
Behalf Of William Holmes
Sent: Saturday, October 20, 2007 6:31 PM
To: ISA Mailing List
Subject: [isalist] Point to Point VPN ISA 2006



Hello,



I have a point to point VPN setup with ISA2006. This has been working just fine 
until my Internet Router Died. I have a new router on order but I have a 
question.



I put a new router (one I had around) in place of my dead router. On this 
router (Linksys befsx41)  I enabled VPN pass through. If I plug a laptop into 
the BEFSX41 directly I can start a PPTP connection and connect to the remote 
ISA2006 server.



However if I try to start the point to point PPTP connection between the Local 
ISA2006 server and the Remote ISA 2006 server I get the following error message 
from the routing and remote access service:



An error occurred during connection of the interface. The connection was 
terminated by the remote computer before it could be completed. For further 
assistance click More Info or search Help and Support Center for this error 
number.



However there is no error number.



If I connect my ISA server directly to my broadband connection then the Tunnel 
works fine (that is ISA to ISA without the intervening router).  Now before 
someone jumps to conclusions about why I have the router, I am on a dynamic IP 
address at home where I am connecting from and I want ISA to always have a 
fixed address. In addition I have two Internet connections one Cable and one 
DSL and the Router (Linksys RV042) handles connection to both and provides 
failover and bandwidth aggregation. It also provides some simple packet 
filtering that cuts down on a lot of the BS that in on the broadbands.



The VPN works fine with the RV042 but not with the older BEFSX41 and I would 
like to understand why, especially since a VPN connection to the same remote 
ISA server works fine when connecting from a laptop that is connected to same 
Router.



Thanks



Bill

------------------------------------------------------
List Archives: //www.freelists.org/archives/isalist/
ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
ISA Server Articles and Tutorials: http://www.isaserver.org/articles_tutorials/
ISA Server Blogs: http://blogs.isaserver.org/
------------------------------------------------------
Visit TechGenix.com for more information about our other sites:
http://www.techgenix.com
------------------------------------------------------
To unsubscribe visit http://www.isaserver.org/pages/isalist.asp
Report abuse to listadmin@xxxxxxxxxxxxx

------------------------------------------------------
List Archives: //www.freelists.org/archives/isalist/
ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
ISA Server Articles and Tutorials: http://www.isaserver.org/articles_tutorials/
ISA Server Blogs: http://blogs.isaserver.org/
------------------------------------------------------
Visit TechGenix.com for more information about our other sites:
http://www.techgenix.com
------------------------------------------------------
To unsubscribe visit http://www.isaserver.org/pages/isalist.asp
Report abuse to listadmin@xxxxxxxxxxxxx

Other related posts: