You need to extend the tunnel port range. Thomas W Shinder, M.D. Site: www.isaserver.org Blog: http://spaces.msn.com/members/drisa/ Book: http://tinyurl.com/3xqb7 MVP -- ISA Firewalls > -----Original Message----- > From: Tom Rogers [mailto:trogers@xxxxxxxxxxxxxxxxxx] > Sent: Wednesday, February 22, 2006 10:15 AM > To: [ISAserver.org Discussion List] > Subject: [isalist] Network Access Message: The page cannot be > displayed > > http://www.ISAserver.org > > I get this error when I try to go to > https://www.4yourservice.com:8443/login.aspx > > Technical Information (for Support personnel) > Error Code: 502 Proxy Error. The specified Secure Sockets Layer (SSL) > port is not allowed. ISA Server is not configured to allow > SSL requests > from this port. Most Web browsers use port 443 for SSL > requests. (12204) > > IP Address: 192.168.1.1 > Date: 2/22/2006 3:38:19 PM <LI > > What do I need to do to correct in ISA 2004? > > TIA, > > -TRogers > > > ------------------------------------------------------ > List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist > ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp > ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ > ------------------------------------------------------ > Visit TechGenix.com for more information about our other sites: > http://www.techgenix.com > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion > List as: tshinder@xxxxxxxxxxxxxxxxxx > To unsubscribe visit > http://www.webelists.com/cgi/lyris.pl?enter=isalist > Report abuse to listadmin@xxxxxxxxxxxxx > >