RE: NT 4.0 Server and ISA

Hi Raj

Curious as Microsoft say otherwise?

Bye for now.

Paul.

----- Original Message -----
From: "Periyasamy, Raj" <psraj@xxxxxxxxxxxx>
To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
Sent: Friday, December 28, 2001 11:49 AM
Subject: [isalist] RE: NT 4.0 Server and ISA


> http://www.ISAserver.org
>
>
> Paul,
> I have been running ISA Ent edition, in a WIN2K adv server, which is a
> memebr of an NT4 domain for 2 months without any problems. As long as you
> plan to install ISA as standalone server without an array AD is not
> required. AD is required only when you need to use ISA arrays. And Adv
> server is an option for ISA Ent edition, just win2000 server would do...
>
> http://www.microsoft.com/ISASERVER/evaluation/sysreqs/default.asp
>
> Regards,
>
> Raj
>
>
>
>
> -----Original Message-----
> From: paul_lemonidis@xxxxxxxxxxx [mailto:paul_lemonidis@xxxxxxxxxxx]
> Sent: December 28, 2001 10:39 PM
> To: [ISAserver.org Discussion List]
> Subject: [isalist] RE: NT 4.0 Server and ISA
>
>
> http://www.ISAserver.org
>
>
> Hi All
>
> I can guarantee ISA won't work on NT4. ISA Std. Edition will work on a W2K
> server without AD in a NT4 domain but thats as far as it goes. The
> Enterprise version requires W2K Advanced Server and an AD Forest. I am
> guessing your ISA machine and the NT4 machine will be on the same internal
> subnet. In which case just set up the NT4 machine's default gateway to
point
> to the ISA box and run it as a SecurNat client. don't see why you would
need
> to install the firewall client.
>
> Hope that helps.
>
> Bye for now.
>
> Paul.
>
> ----- Original Message -----
> From: "Jay J. Mobley" <jmobley@xxxxxxxxxx>
> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
> Sent: Friday, December 28, 2001 11:20 AM
> Subject: [isalist] RE: NT 4.0 Server and ISA
>
>
> http://www.ISAserver.org
>
>
> I don't think you'd have much luck trying to install ISA on an NT4.0
> server, but I could be wrong there
> I can definitely say that the enterprise version (which requires AD will
> not)
> You should be OK if you want an NT40 server to "get internet" through
> the ISA server
> You may even be OK without the ISA client. (SecureNAT)
> What kind of "internet" do you need to "get"?
>
> -Jay
>
> -----Original Message-----
> From: HCALM1@xxxxxxxx [mailto:HCALM1@xxxxxxxx]
> Sent: Friday, December 28, 2001 11:20 AM
> To: [ISAserver.org Discussion List]
> Subject: [isalist] NT 4.0 Server and ISA
>
>
> http://www.ISAserver.org
>
>
> I have a domain controller that's a win2k server, running ISA. I'm
> putting
> an NT4.0 App server on the network and I need it to get internet. I'm
> going
> to install the ISA client on it and pray it works. Any foresite on
> issues I
> may have with this setup? Would it be better to use a NT4.0 Server with
> ISA
> on it, or is that possible?
>
> Thanks,
> Andrew
>
> This electronic message contains information from The Mead
> Corporation or subsidiary companies, which may be confidential,
> privileged or otherwise protected from disclosure.  The
> information is intended to be used solely by the recipient(s)
> named.  If you are not an intended recipient, be aware that
> any review, disclosure, copying, distribution or use of this
> transmission or its contents is prohibited.  If you have
> received this transmission in error, please notify Mead
> immediately at postmaster@xxxxxxxxx
>
>
> ------------------------------------------------------
> You are currently subscribed to this ISAserver.org Discussion List as:
> jmobley@xxxxxxxxxx
> To unsubscribe send a blank email to $subst('Email.Unsub')
>
> ------------------------------------------------------
> You are currently subscribed to this ISAserver.org Discussion List as:
> paul_lemonidis@xxxxxxxxxxx
> To unsubscribe send a blank email to $subst('Email.Unsub')
>
>
> ------------------------------------------------------
> You are currently subscribed to this ISAserver.org Discussion List as:
> psraj@xxxxxxxxxxxx
> To unsubscribe send a blank email to $subst('Email.Unsub')
>
> ------------------------------------------------------
> You are currently subscribed to this ISAserver.org Discussion List as:
paul_lemonidis@xxxxxxxxxxx
> To unsubscribe send a blank email to $subst('Email.Unsub')
>

Other related posts: