Ok, I created the filter as follows; Filter Type > Custom >> IP Protocol > TCP >> Direction > Both >> Local Port > Fixed Port >> Port Number > 1214 >>Remote port > Fixed Port >>Port Number > 1214 Local Computer >>This filter applies to > Default Ip Address on the External Interface Remote Computer >>All remote Computers Then I restarted the Firewall and Proxy service, however I still can't get kazaa to connect, any ideas? Cheers Liam > http://www.ISAserver.org > > > Aside from the obvious 'why would you run a security risk program on your > firewall server ? ' questions ... you need to use packet filters and not > protocol rules on the actual server itself. > > Paul Nuernberger > > -----Original Message----- > From: Liam Farr [mailto:liam@xxxxxxxxxxx] > Sent: Tuesday, June 10, 2003 4:56 PM > To: [ISAserver.org Discussion List] > Subject: [isalist] Kazaa Lite & ISA > > > http://www.ISAserver.org > > > Hi, > > Im trying to get Kazaa Lite to work on my server box, I've added in the > correct port (1214) for inbound and outbound traffic under protocol > definitions, and set the protocol rules for the server box to allow all > IP traffic, but still no luck?! > > Any Ideas? > > > Cheers > > Liam > > ------------------------------------------------------ > List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist > ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp > ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ > ------------------------------------------------------ > Other Internet Software Marketing Sites: > Leading Network Software Directory: http://www.serverfiles.com > No.1 Exchange Server Resource Site: http://www.msexchange.org > Windows Security Resource Site: http://www.windowsecurity.com/ > Network Security Library: http://www.secinf.net/ > Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: > pen@xxxxxxxxx > To unsubscribe send a blank email to $subst('Email.Unsub') > > > ------------------------------------------------------ > List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist > ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp > ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ > ------------------------------------------------------ > Other Internet Software Marketing Sites: > Leading Network Software Directory: http://www.serverfiles.com > No.1 Exchange Server Resource Site: http://www.msexchange.org > Windows Security Resource Site: http://www.windowsecurity.com/ > Network Security Library: http://www.secinf.net/ > Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: liam@xxxxxxxxxxx > To unsubscribe send a blank email to $subst('Email.Unsub') > > --