RE: Itradomain Communications
- From: "Stephen Herrera" <sherrera@xxxxxxxxxx>
- To: "'[ISAserver.org Discussion List]'" <isalist@xxxxxxxxxxxxx>
- Date: Thu, 7 Feb 2002 11:52:23 -0800
Ok I have tried a couple of new things on this and it is still not working.
I changed the Reverse DNS to use the DMZ host rather than the domain
controller. Still no go. I was confused as to why my Kerberos packets were
being reported as Fragmented in my ISA logs (any insight on this would be
appreciated) so I decided to bypass the firewall. I went ahead and used VPN
to gain access to the domain. Now I am on the network and I thought for sure
the authentication would be allowed. Still no good. Still the same error.
Any help would be appreciated. Thank you.
-----Original Message-----
From: Stephen Herrera [mailto:sherrera@xxxxxxxxxx]
Sent: Wednesday, February 06, 2002 9:24 AM
To: [ISAserver.org Discussion List]
Subject: [isalist] RE: Itradomain Communications
http://www.ISAserver.org
Does anyone have any insight on this? I have triple checked everything,
scoured logs....not making much sense. Any help would be appreciated.
Steve
http://www.ISAserver.org
Hello all,
Just wodering if anyone else has tried the Intradomain Communications Lab. I
have gotten all the way to the point where it asks for credentials to add a
machine to the domain. When I enter in the info and select ok it hangs there
for quite a while and then tells me:
"The following error occurred attempting to join the domain 'mydomain.com'
The specified network name is no longer available."
Has anyone seen this or have any ideas? Soooooo close yet so far. Even
though I realize this is not the most secure setup it's a way cool lab to go
through.
steve
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
sherrera@xxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
sherrera@xxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
