You should validate your setup using the Doctor's article below (if you haven't already): http://www.isaserver.org/tutorials/Configuring_ISA_Server_For_Inbound_VPN_Ca lls.html - what ISA service pack are you running? - fyi: you'll need SP1 on that exchange server for exch2k3 sp2. -----Original Message----- From: cdx47 [mailto:extra_net@xxxxxxxxxxx] Sent: Sunday, February 19, 2006 8:21 AM To: [ISAserver.org Discussion List] Subject: [isalist] ISA2k Win2k3 VPN Clients cant ping/see internal resources http://www.ISAserver.org The subject says it all really. Forget using Netbios/DNS names, I cant even ping IP addresses. I think I had this problem before and I solved it with static routes. Anyway the setup is as follows. ISA 2K, VPN Client wizard used to create rules RRAS, Static IP address pool (never been able to get DHCP relay working in 3 years or doing this stuff) I connect to the VPN, I get an IP address on the same Local subnet. But I cant see any other device on the network. All machines are Win2k3 SP1 except the exchange server which is just Win2k3 ------------------------------------------------------ List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ ------------------------------------------------------ Visit TechGenix.com for more information about our other sites: http://www.techgenix.com ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: edgarcia@xxxxxxxxxxxxx To unsubscribe visit http://www.webelists.com/cgi/lyris.pl?enter=isalist Report abuse to listadmin@xxxxxxxxxxxxx