[isalist] Re: ISA 2006 SP1 and Exchange 2007 SP1
- From: "Andy Haigh" <ahaigh@xxxxxxxxxxxxxxxx>
- To: <isalist@xxxxxxxxxxxxx>
- Date: Wed, 28 Jan 2009 12:53:17 +1100
Can you recommend an SSL vendor that provides SAN Certs that will work.
Some I have looked at say Single Server, would that cause a problem with
the cert needing to be on both the Exchange and ISA server?
From: isalist-bounce@xxxxxxxxxxxxx [mailto:isalist-bounce@xxxxxxxxxxxxx]
On Behalf Of Steve Moffat
Sent: Wednesday, 28 January 2009 11:38 AM
To: ISA Mailing List
Subject: [isalist] Re: ISA 2006 SP1 and Exchange 2007 SP1
You need a SAN cert.
From: isalist-bounce@xxxxxxxxxxxxx [mailto:isalist-bounce@xxxxxxxxxxxxx]
On Behalf Of Andy Haigh
Sent: Tuesday, January 27, 2009 8:28 PM
To: ISA Mailing List
Subject: [isalist] Re: ISA 2006 SP1 and Exchange 2007 SP1
OK, after reading the documents I have a question regarding using a
commercial SSL certificate.
With the command (using Tom's example) used to request the certificate:
New-ExchangeCertificate -GenerateRequest -SubjectName
"DC=msfirewall.org, DC=com, O=msfirewall, CN=owa.msfirewall.org"
-DomainName owa.msfirewall.org, smtp.msfirewall.org,
autodiscover.msfirewall.org, msfirewall.org, exch2007mb.msfirewall.org,
exch2007mb -FriendlyName "Microsoft Exchange 2007" -Path c:\mailcert.req
I assume I will be required to purchase a wildcard certificate for this
to work or can I just purchase a single certificate such as
owa.domain.com?
If they bought a single cert would this still allow them to use owa, RPC
over HTTPS and activesync? Would it break things like internal
autodiscover in Outlook 2007?
Thanks
Andy
From: isalist-bounce@xxxxxxxxxxxxx [mailto:isalist-bounce@xxxxxxxxxxxxx]
On Behalf Of Jim Harrison
Sent: Tuesday, 27 January 2009 4:56 PM
To: isalist@xxxxxxxxxxxxx
Subject: [isalist] Re: ISA 2006 SP1 and Exchange 2007 SP1
There are no process changes to ISA that are specific to Exchange SP1
publishing.
.
From: isalist-bounce@xxxxxxxxxxxxx [mailto:isalist-bounce@xxxxxxxxxxxxx]
On Behalf Of Andy Haigh
Sent: Monday, January 26, 2009 4:46 PM
To: isalist@xxxxxxxxxxxxx
Subject: [isalist] ISA 2006 SP1 and Exchange 2007 SP1
Hi,
I am just researching configuring publishing Exchange 2007 SP1 services
via ISA2006 SP1 and have started reading Tom's articles which I believe
are based on the pre SP1 versions of both Exchange and ISA Server. Are
there any differences to the way you would proceed with the setup using
SP1 versions and if so are there any updated documents covering a SP1
product install.
Thanks
Andy
Other related posts:
