Re: Help :(

From: "Jim Harrison" <jim@xxxxxxxxxxxx>
To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
Date: Sat, 8 Sep 2001 16:58:33 -0700
Yep; unless you can bind the app to only the internal NIC, in which case the 
packet filters are superfluous and server publishing should be just fine.

Jim Harrison
MCP(2K), A+, Network+, PCG

  ----- Original Message ----- 
  From: Mark Strangways 
  To: [ISAserver.org Discussion List] 
  Sent: Saturday, September 08, 2001 4:56 PM
  Subject: [isalist] Re: Help :(


  http://www.ISAserver.org


  The app requires 5500,5501,5502,5503 be available .
  I have created 4 Packet filters, and 4 publishing rules, as well as 4 
protocol rules, (inbound).
  I covered all angles, now what should I just need ? The packet filters ?

  regards,

  Mark
    ----- Original Message ----- 
    From: Jim Harrison 
    To: [ISAserver.org Discussion List] 
    Sent: Saturday, September 08, 2001 7:44 PM
    Subject: [isalist] Re: Help :(


    http://www.ISAserver.org


    1. Check your IPEXT...log for refusals; "Blocked"
    2. Check your FWEXT...log for acceptance. "Accept" is inbound, "Connect" is 
outbound.

    Are you sure the app doesn't need secondary connections?  Those aren't 
available in Packet Filters.

    Jim Harrison
    MCP(2K), A+, Network+, PCG

      ----- Original Message ----- 
      From: Mark Strangways 
      To: [ISAserver.org Discussion List] 
      Sent: Saturday, September 08, 2001 1:14 PM
      Subject: [isalist] Help :(


      http://www.ISAserver.org


      Hi all,

      I'm trying to publish a server on my isa box at port 5500... but I cannot 
get it to work.
      I have the server publishing rule in place, and have made packet filters.
      But the app doesn't connect and respond to clients, and at this point I 
don't know if ISA is accepting the remote client.

      Any suggestions ?

      Thanks,

      Mark
      ------------------------------------------------------
      You are currently subscribed to this ISAserver.org Discussion List as: 
jim@xxxxxxxxxxxx
      To unsubscribe send a blank email to $subst('Email.Unsub') 
    ------------------------------------------------------
    You are currently subscribed to this ISAserver.org Discussion List as: 
strangconst@xxxxxxxx
    To unsubscribe send a blank email to $subst('Email.Unsub') 
  ------------------------------------------------------
  You are currently subscribed to this ISAserver.org Discussion List as: 
jim@xxxxxxxxxxxx
  To unsubscribe send a blank email to $subst('Email.Unsub')
Re: Help :(

Other related posts:
