RE: Error 278540

Hi Nick,

You might check out David's tip in today's newsletter.

HTH,
Tom
www.isaserver.org/shinder


-----Original Message-----
From: Nick Chadwick [mailto:nick@xxxxxxxxxxxxxx]
Sent: Tuesday, October 02, 2001 3:28 AM
To: [ISAserver.org Discussion List]
Subject: [isalist] RE: Error 278540


http://www.ISAserver.org


Bill,

I have tried this. If RRAS is not started, and I start isactrl, it whirs
away and starts. But then when I refresh the view in the Services MMC,
it is NOT started. And in the event log I get:

Event Type:     Error
Event Source:   Service Control Manager
Event Category: None
Event ID:       7023
Date:           02/10/2001
Time:           09:24:46
User:           N/A
Computer:       SERVER
Description:
The Microsoft ISA Server Control service terminated with the following
error: 
An invalid argument was supplied.

Looking at the properties for the isactrl service, there are no "Start
Parameters" set, so I have no clue where this "invalid argument" is
coming from.

Nick Chadwick
Development & Technical Support Manager
Comsoft Limited, UK
Tel: +44-(0)20-8240-4452  Fax: +44-(0)20-8240-4449  Mobile:
+44-(0)7740-362408
Email: nick@xxxxxxxxxxxxxx <mailto:nick@xxxxxxxxxxxxxx>
Web: http://www.comsoft.ltd.uk/


-----Original Message-----
From: Ogilvie, Bill L [mailto:Bill.Ogilvie@xxxxxxxxxx]
Sent: 01 October 2001 17:52
To: [ISAserver.org Discussion List]
Subject: [isalist] RE: Error 278540


http://www.ISAserver.org


I have found that the ISA server control service must start before the
RRAS
service. If RRAS service starts before the ISA services then you will
get
the 278540 error. I've set rhe RRAS service to manual startup for now,
until
I can find a better fix.

Bill Ogilvie MCSE, MCP+I
Network/NT Manager
Central Texas Veterans HCS
(254) 778-4811 x4986


-----Original Message-----
From: Nick Chadwick [mailto:nick@xxxxxxxxxxxxxx]
Sent: Friday, September 21, 2001 5:41 AM
To: [ISAserver.org Discussion List]
Subject: [isalist] Error 278540


http://www.ISAserver.org


After rebooting my server, my ISA Server now fails to start. In the
event
log, it mentions server-specific error 278540. I have run chkdsk,
re-applied
SP2 and tried re-installing ISA, but it still will not start.
 
Any clues?
 
Nick Chadwick 
Development & Technical Support Manager 
Comsoft Limited, UK 
Tel: +44-(0)20-8240-4452  Fax: +44-(0)20-8240-4449  Mobile:
+44-(0)7740-362408 
Email: nick@xxxxxxxxxxxxxx < mailto:nick@xxxxxxxxxxxxxx> 
Web: http://www.comsoft.ltd.uk/ 


**********************************************************************
Disclaimer: This e-mail contains proprietary information some or all
of which may be legally privileged. It is for the intended recipient
only. If an addressing or transmission error has misdirected this
e-mail, please notify the author by replying to this e-mail and then
permanently delete the message from your computer. If you are not the
intended recipient you must not use, disclose, distribute, copy, print
or rely on the e-mail.

The opinion expressed in this Email is that of the author and not 
necessarily that of Comsoft Limited.

While attachments are virus checked, Comsoft Limited do not accept any
liability in respect of a virus which is not detected.
**********************************************************************

------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
bill.ogilvie@xxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')

------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
nick@xxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')


**********************************************************************
Disclaimer: This e-mail contains proprietary information some or all
of which may be legally privileged. It is for the intended recipient
only. If an addressing or transmission error has misdirected this
e-mail, please notify the author by replying to this e-mail and then
permanently delete the message from your computer. If you are not the
intended recipient you must not use, disclose, distribute, copy, print
or rely on the e-mail.

The opinion expressed in this Email is that of the author and not 
necessarily that of Comsoft Limited.

While attachments are virus checked, Comsoft Limited do not accept any
liability in respect of a virus which is not detected.
**********************************************************************

------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
tshinder@xxxxxxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')

Other related posts: