RE: Error 278540

I have found that the ISA server control service must start before the RRAS
service. If RRAS service starts before the ISA services then you will get
the 278540 error. I've set rhe RRAS service to manual startup for now, until
I can find a better fix.

Bill Ogilvie MCSE, MCP+I
Network/NT Manager
Central Texas Veterans HCS
(254) 778-4811 x4986


-----Original Message-----
From: Nick Chadwick [mailto:nick@xxxxxxxxxxxxxx]
Sent: Friday, September 21, 2001 5:41 AM
To: [ISAserver.org Discussion List]
Subject: [isalist] Error 278540


http://www.ISAserver.org


After rebooting my server, my ISA Server now fails to start. In the event
log, it mentions server-specific error 278540. I have run chkdsk, re-applied
SP2 and tried re-installing ISA, but it still will not start.
 
Any clues?
 
Nick Chadwick 
Development & Technical Support Manager 
Comsoft Limited, UK 
Tel: +44-(0)20-8240-4452  Fax: +44-(0)20-8240-4449  Mobile:
+44-(0)7740-362408 
Email: nick@xxxxxxxxxxxxxx < mailto:nick@xxxxxxxxxxxxxx> 
Web: http://www.comsoft.ltd.uk/ 


**********************************************************************
Disclaimer: This e-mail contains proprietary information some or all
of which may be legally privileged. It is for the intended recipient
only. If an addressing or transmission error has misdirected this
e-mail, please notify the author by replying to this e-mail and then
permanently delete the message from your computer. If you are not the
intended recipient you must not use, disclose, distribute, copy, print
or rely on the e-mail.

The opinion expressed in this Email is that of the author and not 
necessarily that of Comsoft Limited.

While attachments are virus checked, Comsoft Limited do not accept any
liability in respect of a virus which is not detected.
**********************************************************************

------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
bill.ogilvie@xxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')

Other related posts: