RE: DMZ Problem URGENT
- From: Loïc Addario <laddario@xxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Wed, 7 Nov 2001 15:00:22 +0100
The DMZ NIC is not in the LAT ...
I think that It's a routing problem
-----Message d'origine-----
De : Magnus Werner [mailto:magnus.werner@xxxxxx]
Envoyé : mercredi, 7. novembre 2001 14:53
À : [ISAserver.org Discussion List]
Objet : [isalist] RE: DMZ Problem URGENT
is the DMZ NIC on the ISA in the LAT? remove it....
Mvh Magnus W
-----Original Message-----
From: Loïc Addario [mailto:laddario@xxxxxxxx]
Sent: Wednesday, November 07, 2001 13:36
To: [ISAserver.org Discussion List]
Subject: [isalist] RE: DMZ Problem URGENT
http://www.ISAserver.org
The server in the DMZ has the default GW ip address of the ISA DMZ
interface ...
I don't understand where I could make a mistake ....
-----Message d'origine-----
De : Mikkel Høyrup [mailto:mih@xxxxxxxxxxx]
Envoyé : mercredi, 7. novembre 2001 11:30
À : [ISAserver.org Discussion List]
Objet : [isalist] RE: DMZ Problem URGENT
http://www.ISAserver.org
I have had exactly the same problem - couldn't solve it....
So, if you find a solution, please post it!
/Mikkel
-----Original Message-----
From: Richard Pettigrew [mailto:Richard@xxxxxxxxxxx]
Sent: 7. november 2001 10:36
To: [ISAserver.org Discussion List]
Subject: [isalist] RE: DMZ Problem URGENT
http://www.ISAserver.org
Have you ensured that the default gateway for the servers in the DMZ is
pointing to the ip address of the DMZ nic in your ISA Server?
-----Original Message-----
From: Loïc Addario [mailto:laddario@xxxxxxxx]
Sent: 07 November 2001 07:27
To: [ISAserver.org Discussion List]
Subject: [isalist] DMZ Problem URGENT
http://www.ISAserver.org
> Hello,
>
> I still have a problem with my DMZ.
> I use one ISA Server with three network cards, on the DMZ I use public
> IP address.
> I created a subnet of my public Ip adress assign by my ISP, I have
> verifyed the ROUTE on my WINDOWS 2K server, all seems OK, but ...
> I activated routing protocol and ip packet filter, I have made rules
> for
> the DMZ like http or ICMP on the server on the perimeter network,
> however, I can access my server on the dmz from the Internet. It 's
> like there
> is no routing possible from Internet to the DMZ.
>
> Some Ideas ?
> Thanks.
>
>
>
>
> Loïc ADDARIO
> DL Services SA
> Av. des Pâquiers 22
> 2072 Saint-Blaise
>
> tél +41 32 756 88 20
> fax +41 32 756 88 21
>
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
richard@xxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
mih@xxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
laddario@xxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
magnus.werner@xxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts: