Hi Joseph, I must be denser than usual tonight, because I can't picture the setup. Can you draw a picture on a cocktail napkin and scan it? :-) Thanks! Tom www.isaserver.org/shinder -----Original Message----- From: Joseph [mailto:cismic@xxxxxxx] Sent: Saturday, March 23, 2002 1:27 AM To: [ISAserver.org Discussion List] Subject: [isalist] RE: DMZ http://www.ISAserver.org Hi Tom, I would have 2 NICS on the web server and 2 NICS on the staging machine. The staging machine will be used to just stage and pre-test content before posting to the web machine. The web machine and staging machine will be the only once with a direct connect via a managed switch. Joseph -----Original Message----- From: Thomas W. Shinder [mailto:tshinder@xxxxxxxxxxxxxxxxxx] Sent: Friday, March 22, 2002 10:07 PM To: [ISAserver.org Discussion List] Subject: [isalist] RE: DMZ http://www.ISAserver.org Hi Joseph, Are you wanting to have one NIC in the DMZ and one NIC on the private network? If so, that doesn't seem like a good idea to me. HTH< Tom www.isaserver.org/shinder -----Original Message----- From: Joseph [mailto:cismic@xxxxxxx] Sent: Friday, March 22, 2002 6:18 PM To: [ISAserver.org Discussion List] Subject: [isalist] DMZ http://www.ISAserver.org Hi All, I'm thinking of adding a second NIC to one of my web servers in the DMZ that will be connect to a secure network that is behind my second firewall. The machine that it will be attached to is a staging server that will also have two NIC'S. Does anyone see this as an issue? What would be a good way to secure that connection since it's only going to be used to prop new material. And, possible allow for the content management server to be used on the staging server. Thank you, Joseph ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: tshinder@xxxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: cismic@xxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: tshinder@xxxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')