Re: Can anyone help?
- From: "Jim Harrison" <jim@xxxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Thu, 4 Oct 2001 09:58:53 -0700
This is a job better suited to the routing infrastructure in your org.
This way, you can use secureNAT clients.
Jim Harrison
MCP(2K), A+, Network+, PCG
----- Original Message -----
From: "Jenna Johnson" <jennajohnson@xxxxxxxxxxx>
To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
Sent: Thursday, October 04, 2001 08:17
Subject: [isalist] Can anyone help?
http://www.ISAserver.org
I'm new to this and hoping someone can help me figure this out...
I just set up an ISA server for the production environment (everything is
running fine so far) and an existing Win2k server with 2 NICs acting as
gateway for a dev environment. Both environments are on the same LAN
segment but future plans are to separate the dev from the production with
its own firewall. But for now what we want to do is filter outgoing
traffic based on IP addresses and route them through the desired gateway.
Situation:
How to route all outgoing traffic with IPs starting with i.e. 205.x.x.x
from the production environment to go through the dev gateway instead of
through ISA?
Has anyone come across this?
Jenna
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
jim@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
