Hi Koen,
Answers inline!
2016-06-22 14:15 GMT+02:00 Koen Veelenturf <koen.veelenturf@xxxxxx>:
Dear Eduard,
I found that the Demonstrator automagically creates the mapping, but my
own VMs with the compiled stack didn’t. That solved my issue, thank you.
One question though, do I understand correctly that the mapping for
applications is done statically (for now)?
Is it possible at this moment to make the applications reachable from for
instance two connections at the same time?
Cheers,
Koen
On 22 Jun 2016, at 13:20, Eduard Grasa Gras <eduard.grasa@xxxxxxxxx>
wrote:
Dear Koen,
I think that you are just missing a little piece, the application to DIF
mappings. Since you have multiple DIFs to choose from, when the client
requests a flow to a destination application the IPCM needs to know
somehow which DIF to choose. In RINA the component that has this
information is the DIF allocator.
The DIF allocator is not really implemented in the stack, it is just
reduced to a configuration file with a static directory of destination
application name to DIF mappings. The file is located at <IRATI
installation path>/etc/da.map (must be called da.map). You can edit it
anytime, the IPCM will detect it and reload the mappings. Here is an
example:
{
"applicationToDIFMappings" : [ {
"encodedAppName" : "traffic.generator.server-1--",
"difName" : "vpn1.DIF"
}, {
"encodedAppName" : "server.ioq3-0--",
"difName" : "vpn1.DIF"
}, {
"encodedAppName" : "rina.apps.echotime.server-1--",
"difName" : "vpn1.DIF"
}, {
"encodedAppName" : "rina.apps.manager-1--",
"difName" : "NMS.DIF"
}]
}
So you just need to edit the file with the proper mappings. It works both
for flow allocation and application registration (in case the application
to be registered doesn't specify a DIF).
Cheers,
Eduard
2016-06-22 12:51 GMT+02:00 Koen Veelenturf <koen.veelenturf@xxxxxx>:
Dear all,
I’m currently doing a research project for my master on RINA and
multihoming.
I’ve been playing around with the IRATI demonstrator and also built by
own VMs with the IRATI stack.
I’ve built this network topology and created a couple of DIFs to
represent two different ISPs.
These are the DIFs I currently have:
- Node1 - Node4: “Provider A Access DIF”
- Node1 - Node2: “Provider B Access DIF”
- Node4 - Node3: “Provider A Regional DIF”
- Node2 - Node3: “Provider B Regional DIF”
- Node3 - Node5: “Upstream DIF”
And between Node1 and Node5 I’ve created DIFs for “Internet ProviderA
DIF” and “Internet ProviderB DIF” which spans over the corresponding access
and regional DIFs.
I was able to successfully enroll the DIFS using the IPCM console and was
able to run a RINA echo time server on node 5, while specifying the DIF it
should register on.
However, I was not able to run the client. I just the following commands
for server and client:
server: rina-echo-time -d providerAInternet.DIF -l
client: rina-echo-time -d providerAInternet.DIF -c 100
<mulithometopo-network-rep.png>
Running the client results in the following error message in the ipcm.log
file:
<logfile>
793(1466590549)#librina.nl-manager (DBG): NL msg RX. Fam: 21; Opcode:
44_APP_ALLOC_FLOW_REQ; Sport: 8172; Dport: 1; Seqnum: 1466590550; Request;
SIPCP: 0; DIPCP: 0
793(1466590549)#librina.core (DBG): Added event of type
0_FLOW_ALLOCATION_REQUESTED and sequence number 1466590550 to events queue
793(1466590549)#ipcm (DBG): Got event of type 0_FLOW_ALLOCATION_REQUESTED
and sequence number 1466590550
793(1466590549)#ipcm.flow-alloc
(ERR)[flow_allocation_requested_local]: Error: Cannot find an IPC process
to serve flow allocation request (local-app =
rina.apps.echotime.client:1::, remote-app = rina.apps.echotime.server:1::
793(1466590549)#librina.ipc-manager (DBG):
ApplicationManager::flowAllocated called
793(1466590549)#librina.nl-manager (DBG): NL msg TX. Fam: 21; Opcode:
45_APP_ALLOC_FLOW_REQ_RES; Sport: 1; Dport: 8172; Seqnum: 1466590550;
Response; SIPCP: 0; DIPCP: 0
793(1466590549)#ipcm.flow-alloc
(INFO)[application_flow_allocation_failed_notify]: Flow allocation between
rina.apps.echotime.client:1:: and rina.apps.echotime.server:1:: failed:
applications informed
793(1466590551)#librina.nl-manager (DBG): NL msg RX. Fam: 21; Opcode:
27_SOCK_CLOSED_NOT; Sport: 0; Dport: 1; Seqnum: 0; Notification; SIPCP: 0;
DIPCP: 0
793(1466590551)#librina.core (DBG): NL socket at port 8172 is closed
793(1466590551)#librina.core (DBG): Added event of type
22_OS_PROCESS_FINALIZED and sequence number 0 to events queue
793(1466590551)#ipcm (DBG): Got event of type 22_OS_PROCESS_FINALIZED and
sequence number 0
793(1466590551)#ipcm.app (INFO)[os_process_finalized_handler]:
Application rina.apps.echotime.client:1::terminated
</logfile>
What I’m trying to do should in theory be possible right? Am I doing
something wrong or might there be a problem with the stack?
Please let me know if there’s more information needed.
Kind regards,
Koen Veelenturf
