i tried method 2 suggested below and fixed my problem.
now the GUI is working properly, but the monitor type is reported incorrectly,
is there anyway to probe the monitor alone.
# XFree86 -configure
# XFree86 -xf86config /root/XF86Config.new
-- if that worked
# cp /root/XF86Config.new /etc/X11/XF86Config
-- if that does not work,
-- specify the horizontal frequency as "30-55" and vertical frequency as
"50-100" that should be fine!
Linux.Net -->Open Source to everyone
Powered by Linare Corporation