hello there,
a couple of days back i had posted a question about Remote Login,
and a few of u had replied back with answers.
prof.sriram had told me that he wud be able to give a step by step
description as to how it is done... first lemme tell what i have
1. 10 boxes of p-I with mercury boards
2. 16mb ram on each box
3. Display card
4. network cards and Boot Ram
5. all interfacing cables
none of the machines have a floppy drive, and my pocket 's sloppy for
so many floppy drives!
and all i want to do is
1. to be able to remote login these machines to any one of the hosts
on my network
2. to be able to run atleast a window manager which doesn't require
much resources (obviously)...
so people, guidelines and pointers are kindly requested...
--
thank you, once again
warm regards
mohan
mohanakrishnan@xxxxxxxxxxxx
From A.Guru prasadh" <parthipatel@xxxxxxxxxxxxxx Tue Dec 17 12:54:42 2002
From: A.Guru prasadh" <parthipatel@xxxxxxxxxxxxxx (A.Guru prasadh)
Date: 17 Dec 2002 12:54:42 -0000
Subject: [ilugc] wvdial.conf help
Message-ID: <20021217125442.18951.qmail@xxxxxxxxxxxxxxxxxxxxxxxx>
Hai,
I have GVC 33.6 Kbps external modem and RH 7.0.
I recently installed wvdial.Here is my wvdial.conf details:
[Dialer Defaults]
Modem=/dev/ttyS0
Baud=115200
Init1=ATX0
Init2=ATQ0 V1 E1 S0=0 &C1 &D2 S11=55 +FCLASS=0
Phone= xxxxxx
Username= xxx
Password = xxx
Setvolume= 1
DialCommand = ATDT
Init4 = ATMIL3
[Dialer cs]
Stupid mode = 1
When i dialed the ISP number, it dials, but gives NO CARRIER.How
to rectify this? Kindly please help.
Thanks in advance
Guru prasadh
, ,
/ \
((__-^^-,-^^-__))
`-_---' `---_-'
`--|o` 'o|--'
\ ` /
): :(
:o_o:
"-"
The above ASCII image is:
Copyright (C) 2001, Free Software Foundation, Inc.
