[PCB_FORUM] Re: via to gnd
- From: "Gary MacIndoe" <gary.macindoe@xxxxxxx>
- To: icu-pcb-forum@xxxxxxxxxxxxx
- Date: Wed, 6 Apr 2005 11:00:48 -0600
Thanks Carl, looks like a pretty handy feature!
Gary E. MacIndoe
PCB Design Engineer
Advanced Micro Devices, Inc.
Longmont, Colorado
-----Original Message-----
From: Musetti, Carl [mailto:cmusetti@xxxxxxxxxxxxxxxx]
Sent: Wednesday, April 06, 2005 10:17 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: via to gnd
Well in 15.2 cadence put a nice new feature on the copy command to retain
the net of the via being copied. It is in the options tab. I use that all
the time now for gnd via assignments.
Carl
-----Original Message-----
From: Gary MacIndoe [mailto:gary.macindoe@xxxxxxx]
Sent: Wednesday, April 06, 2005 11:44 AM
To: Allegro Forum
Subject: [PCB_FORUM] via to gnd
All,
Sorry if this has been covered lately. What is the best way to assign a
free standing via to gnd?
Thanks for any help!
Gary E. MacIndoe
PCB Design Engineer
Advanced Micro Devices, Inc.
Longmont, Colorado
Other related posts:
