[PCB_FORUM] Re: using both forums

Ditto.
  -----Original Message-----
  From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of sjchar3@xxxxxxxxxxxx
  Sent: Thursday, May 17, 2007 10:54 AM
  To: icu-pcb-forum@xxxxxxxxxxxxx
  Subject: [PCB_FORUM] using both forums


  I usually stay on this forum for all answers.

   
  -----Original Message-----
  From: jwages@xxxxxxxxx
  To: icu-pcb-forum@xxxxxxxxxxxxx
  Sent: Thu, 17 May 2007 7:25 AM
  Subject: [PCB_FORUM] Re: possessed design!


  I highly suggest using both forums. I use the online forum to check for past 
issues first and then post to the icu-pcb-forum@xxxxxxxxxxxx when I can’t find 
a solution.

  Jim S. Wages / SR. PCB Layout Designer:  
  Cary, NC - H: 919-466-1596 Cell: 919-484-2963

  -----Original Message-----
  From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Seymour
  Sent: Thursday, May 17, 2007 10:04 AM
  To: icu-pcb-forum@xxxxxxxxxxxxx
  Subject: [PCB_FORUM] Re: possessed design!

  Just curious...

  I noticed that the number of emails on this forum has 
  been picking up lately.

  Are folks subscribed to both Allegro forums?
  icu-pcb-forum@xxxxxxxxxxxxx and cdnusers.org

  or 

  Do folks prefer one forum over the other?

  Looking for general comments. Personal Interest.

  Dave


  gnieski_mike@xxxxxxx wrote:


      Hit the nail on the head! This worked great.....I did have multiple 
shapes and could only see the problem shape with boundary on. 
      This forum is always the first place to go when there's a problem. Great 
help! 

      Mike



------------------------------------------------------------------------------

  From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Edwards, Kevin
  Sent: Wednesday, May 16, 2007 4:23 PM
  To: icu-pcb-forum@xxxxxxxxxxxxx
  Subject: [PCB_FORUM] Re: possessed design!
  Yup, just go to Drawing Options and click on the box to the left of where it 
says Out of Date Shapes.  It will bring up a list, scroll down and find the 
ones that are out of date and click the coordinates to bring you to the exact 
location (it will tell you the layer it is on).  You may need to turn on the 
“Boundary” for that etch layer to see it due to the shape priority (sometimes 
there are multiple shapes but only one is visible.


------------------------------------------------------------------------------

  From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of gnieski_mike@xxxxxxx
  Sent: Wednesday, May 16, 2007 1:12 PM
  To: icu-pcb-forum@xxxxxxxxxxxxx
  Subject: [PCB_FORUM] Re: possessed design!

  any easy way to find an out of date shape?



------------------------------------------------------------------------------

  From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Edwards, Kevin
  Sent: Wednesday, May 16, 2007 4:04 PM
  To: icu-pcb-forum@xxxxxxxxxxxxx
  Subject: [PCB_FORUM] Re: possessed design!
  Go into the “Drawing Options” and make sure they are all green.  Sometimes 
you have out of date shapes that prevent it from being up to date.


------------------------------------------------------------------------------

  From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Macindoe, Gary
  Sent: Wednesday, May 16, 2007 12:07 PM
  To: icu-pcb-forum@xxxxxxxxxxxxx
  Subject: [PCB_FORUM] possessed design!

  Hey guys,

  Allegro 610 Expert, Windows XP Pro.

  Well, my design has become “possessed”!

  No matter what I do, the Status shows DRC errors as “Out Of Date” with 0 
errors:

  - I ran Tools -> Database Check (both checked), passed squeaky clean.

  - I ran Tools -> Update DRC, resulting in “No DRC errors detected”.

  - I ran “Update DRC” from Drawing Options window, Status tab, also resulting 
in “No DRC errors detected”.

  - I got out of Allegro, got back in, then I repeated the above.

  Anyone ever see this one?  In all my years using this tool, I’ve never seen 
the DRC errors stay “Out Of Date” after updating.

  Thanks for any help!

  Gary



-- Dave Seymour, CID+Catapult Communications Inc.800 Perimeter Park Dr, Suite 
AMorrisville, NC 27560 Direct: (919)653-4249Main: (919)653-4180Fax: 
(919)653-4297 Dave.seymour@xxxxxxxxxxxx 
------------------------------------------------------------------------------
  Check Out the new free AIM(R) Mail -- 2 GB of storage and industry-leading 
spam and email virus protection.

Other related posts: