[PCB_FORUM] Re: uprev_overwrite

Thanks Seiji and Charlie.  

I am not sure as time goes on, how one would know what the last revision
of software the symbol was saved in.

Maybe someone from Cadence can weigh in on uprev protocol with respect
to allegro symbols?

Chris

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of arimitsu seiji
Sent: Thursday, June 21, 2007 4:48 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: uprev_overwrite

Chris,

My only problem I've had with the symbol not being uprevved is when I
tried 
using Version 13 symbol on Version 15.  I didn't have any problems using

Version 14 symbols in Version 15.  I think this is what Charlie was
saying. 
 Hope this what you are looking for.

Seiji


>From: "Davies, Charles (cdavies)" <cdavies@xxxxxxxxxx>
>Reply-To: icu-pcb-forum@xxxxxxxxxxxxx
>To: <icu-pcb-forum@xxxxxxxxxxxxx>
>Subject: [PCB_FORUM] Re: uprev_overwrite
>Date: Thu, 21 Jun 2007 18:08:24 -0400
>
>Chris,
>
>As far as I know, the uprevving is only required when a symbol is more
>than 2 (I think) major revs older than the release you are using for
the
>current design.  This may have changed in recent releases, but am not
>able to verify as all our symbols are at 15.x due to uprevving.
>
>Regards,
>Charlie
>
>
>
>________________________________
>
>From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
>[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Christopher
>Nunn
>Sent: Thursday, June 21, 2007 6:02 PM
>To: icu-pcb-forum@xxxxxxxxxxxxx
>Subject: [PCB_FORUM] uprev_overwrite
>
>
>
>Hi,
>
>
>
>Are there users that are using the command in the subject line for
>"up-revving" library symbols between software releases?  It was
>something we have done routinely for a long time, but may not even be
>necessary.  Any feedback would be appreciated.
>
>
>
>Thanks,
>
>Chris
>


-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: