[PCB_FORUM] Re: uprev_overwrite

Ahhh...  Makes sense now (aside from the normal 15.5.1 / 15.6 stuff :)  

Thanks, Frank.

-- 
George Patrick
Tektronix, Inc.
Central Engineering, EDS Applications Support
P.O. Box 500, M/S 39-512
Beaverton, OR 97077-0001
* 503-627-5272 (voice)     * 503-627-5587 (fax)
http://www.tektronix.com    http://www.pcb-designer.com
 
"Off-Grid and Proud of it!"


-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Frank Farmar
Sent: Friday, June 22, 2007 10:51
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: uprev_overwrite




dbstat reports the earliest release that can open the Allegro database.
Thus
if you save a database in 15.7 but do not take advantage of any 15.7
database
features it will report that the database is 15.6 or an earlier Allegro
15 release.


> From icu-pcb-forum-bounce@xxxxxxxxxxxxx  Fri Jun 22 13:25:03 2007
> Delivered-To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: uprev_overwrite
> From: "Jean Bratton" <jean.bratton@xxxxxxxxxxxxxx>
> To: <icu-pcb-forum@xxxxxxxxxxxxx>
> X-original-sender: jean.bratton@xxxxxxxxxxxxxx
> List-software: Ecartis version 1.0.0
> List-Id: icu-pcb-forum <icu-pcb-forum.freelists.org>
> X-List-ID: icu-pcb-forum <icu-pcb-forum.freelists.org>
> List-owner: <mailto:akulik@xxxxxxx,Michael.Catrambone@xxxxxxxxxx>
> List-archive: <http://www.freelists.org/archives/icu-pcb-forum>
> 
> I thought maybe it was me...mine reports 15.2 instead of 15.7.
> 
> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
> george.h.patrick@xxxxxxxxxxxxxx
> Sent: Friday, June 22, 2007 11:57 AM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: uprev_overwrite
> 
> 
> 
> Except it reports version 15.7 as 15.6 :)
> 
> 
> OOOOPpppppppppssssssss.......
> 
> -- 
> George Patrick
> Tektronix, Inc.
> Central Engineering, EDS Applications Support
> P.O. Box 500, M/S 39-512
> Beaverton, OR 97077-0001
> * 503-627-5272 (voice)     * 503-627-5587 (fax)
> http://www.tektronix.com    http://www.pcb-designer.com
>  
> "Off-Grid and Proud of it!"
> 
> 
> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Jim Saltouros
> Sent: Thursday, June 21, 2007 19:14
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: uprev_overwrite
> 
> 
> Chris,
> 
> You can run the 'dbstat' command on a (.brd or .dra) file
> and it will return the database version and platform.
> 
> The 'dbstat' command is executed from a Command Prompt window
> 
> Here is an example:
> 
>       E:\Temp_Files\Allegro\dbstat xyz.dra
>        xyz.dra:   14.2  NT
> 
>  ~Jimi
> 
> ____________________________________________________________________ 
> >
> >
> >Thanks Seiji and Charlie.  
> >
> >I am not sure as time goes on, how one would know what the last
> revision
> >of software the symbol was saved in.
> >
> >Maybe someone from Cadence can weigh in on uprev protocol with
respect
> >to allegro symbols?
> >
> >Chris
> >
> >-----Original Message-----
> >From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> >[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of arimitsu
seiji
> >Sent: Thursday, June 21, 2007 4:48 PM
> >To: icu-pcb-forum@xxxxxxxxxxxxx
> >Subject: [PCB_FORUM] Re: uprev_overwrite
> >
> >Chris,
> >
> >My only problem I've had with the symbol not being uprevved is when I
> >tried 
> >using Version 13 symbol on Version 15.  I didn't have any problems
> using
> >
> >Version 14 symbols in Version 15.  I think this is what Charlie was
> >saying. 
> > Hope this what you are looking for.
> >
> >Seiji
> >
> >_______________________________
> >>
> >>From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> >>[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Christopher
> >>Nunn
> >>Sent: Thursday, June 21, 2007 6:02 PM
> >>To: icu-pcb-forum@xxxxxxxxxxxxx
> >>Subject: [PCB_FORUM] uprev_overwrite
> >>
> >>
> >>
> >>Hi,
> >>
> >>
> >>
> >>Are there users that are using the command in the subject line for
> >>"up-revving" library symbols between software releases?  It was
> >>something we have done routinely for a long time, but may not even
be
> >>necessary.  Any feedback would be appreciated.
> >>
> >>
> >>
> >>Thanks,
> >>
> >>Chris
> >>


> 
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: