[PCB_FORUM] Re: trace impedance report

Go to >  Tools> Setup Advisor>
click "Next" once then "Edit Cross-Section"
 
 
 -----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Gennadiy Kiryukhin
Sent: Wednesday, November 23, 2005 11:30 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: trace impedance report



I have "Allegro PCB Design 220 (PCB Studio)". It does not say anything else
in the About window. Assuming I have the right software version/product, how
would I define the copper weight?

Gennadiy

Gerry Meier wrote: 

Please state what product you are using? whether it is Allrgro Studio Studio
Performace or Expert. The tool level may influence the answer.
 
In Allegro Performace and Expertyou set up the dielectric thickness and
copper thickness in Cross section.
 
 
Gerry Meier
Sr. PCB Designer
Freedom CAD Services, Inc.
Voice: (603) 864-1300 x1350
AL Voice: (256) 417-6944
Email: gerry.meier@xxxxxxxxxxxxxx
visit our website at<http://www.freedomcad.com
 

  _____  

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Christian Deldicque
Sent: Wednesday, November 23, 2005 3:02 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: trace impedance report


Allegro PCB SI product, let you set up that.
 
  _____  

From: icu-pcb-forum-bounce 
 @freelists.org [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
Gennadiy Kiryukhin
Sent: Tuesday, November 22, 2005 7:52 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: trace impedance report


Then what??  Where do you define the copper weight?

rajendran.velayudhan@xxxxxxxxx wrote:


In reports you can see New/edit.There you select net impeadance.....

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Hamid Awais
Sent: Tuesday, November 22, 2005 3:52 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Cc: hawais@xxxxxxxxxxxxxxxx
Subject: [PCB_FORUM] trace impedance report



Hello Allegro Guru's:



Does Allegro (any version/flavor) opt to generate any report regarding Trace
impedances?



Thanks,

Hamid















Confidentiality Notice 

The information contained in this electronic message and any attachments to
this message are intended
for the exclusive use of the addressee(s) and may contain confidential or
privileged information. If
you are not the intended recipient, please notify the sender at Wipro or
Mailadmin@xxxxxxxxx immediately
and destroy all copies of this message and any attachments.

Other related posts: