[PCB_FORUM] Re: trace impedance report

Please state what product you are using? whether it is Allrgro Studio
Studio Performace or Expert. The tool level may influence the answer.
 
In Allegro Performace and Expertyou set up the dielectric thickness and
copper thickness in Cross section.
 
 
Gerry Meier
Sr. PCB Designer
Freedom CAD Services, Inc.
Voice: (603) 864-1300 x1350
AL Voice: (256) 417-6944
Email: gerry.meier@xxxxxxxxxxxxxx
visit our website at<http://www.freedomcad.com
 

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Christian
Deldicque
Sent: Wednesday, November 23, 2005 3:02 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: trace impedance report


Allegro PCB SI product, let you set up that.
 
________________________________

From: icu-pcb-forum-bounce 
 @freelists.org [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
Gennadiy Kiryukhin
Sent: Tuesday, November 22, 2005 7:52 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: trace impedance report


Then what??  Where do you define the copper weight?

rajendran.velayudhan@xxxxxxxxx wrote:


        In reports you can see New/edit.There you select net
impeadance.....

                -----Original Message-----
                From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Hamid Awais
                Sent: Tuesday, November 22, 2005 3:52 PM
                To: icu-pcb-forum@xxxxxxxxxxxxx
                Cc: hawais@xxxxxxxxxxxxxxxx
                Subject: [PCB_FORUM] trace impedance report
                
                

                Hello Allegro Guru's:

                

                Does Allegro (any version/flavor) opt to generate any
report regarding Trace impedances?

                

                Thanks,

                Hamid

                

                

                

                

                

                



Confidentiality Notice 

The information contained in this electronic message and any attachments
to this message are intended
for the exclusive use of the addressee(s) and may contain confidential
or privileged information. If
you are not the intended recipient, please notify the sender at Wipro or
Mailadmin@xxxxxxxxx immediately
and destroy all copies of this message and any attachments.

Other related posts: