[PCB_FORUM] Re: swap functions with SPB16.01

Hello All.

I installed the latest hotfix (16.01.S010) and the swap functions is now fully 
working!
So, the PCR has been noticed in hotfix S009 but seems to be really applied in 
S010...

Really, nobody has been annoyed with this?

        William.


> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-
> bounce@xxxxxxxxxxxxx] On Behalf Of William Billereau
> Sent: 02 June, 2008 6:40 PM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: swap functions with SPB16.01
> 
> Or a netrev problem ;-)
> 
> No error or warnings in netrev.lst.
> Just a strange thing (Missing symbol has error FALSE) in the
> netrev.lst:
> (I am investigating this on Sourcelink...)
> I also have to check if it is the same thing with 15.7.
> I will compare files.
> 
> 
>       William.
> 
> Cadence Design Systems, Inc. netrev 16.01 Mon Jun 02 18:28:18 2008
> (C) Copyright 2002 Cadence Design Systems, Inc.
> 
> ------ Directives ------
> 
> RIPUP_ETCH FALSE;
> RIPUP_SYMBOLS ALWAYS;
> Missing symbol has error FALSE;
> SCHEMATIC_DIRECTORY '..\packaged';
> BOARD_DIRECTORY '';
> OLD_BOARD_NAME 'C:/EDA/lib_archive/worklib/lib/physical/spb160.brd';
> NEW_BOARD_NAME 'C:/EDA/lib_archive/worklib/lib/physical/spb160.brd';
> 
> CmdLine: netrev -$ -i ..\packaged -l -u -y 1 -z
> C:/EDA/lib_archive/worklib/lib/physical/#Taaaaaa01376.tmp
> 
> ------ Preparing to read pst files ------
> 
> Starting to read ../packaged/pstchip.dat
>    Finished reading ../packaged/pstchip.dat (00:00:00.21)
> Starting to read ../packaged/pstxprt.dat
>    Finished reading ../packaged/pstxprt.dat (00:00:00.00)
> Starting to read ../packaged/pstxnet.dat
>    Finished reading ../packaged/pstxnet.dat (00:00:00.00)
> 
> ------ Oversights/Warnings/Errors ------
> 
> 
> ------ Library Paths ------
> 
> > -----Original Message-----
> > From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-
> > bounce@xxxxxxxxxxxxx] On Behalf Of Jean-Charles TEYSSIER
> > Sent: 02 June, 2008 6:22 PM
> > To: icu-pcb-forum@xxxxxxxxxxxxx
> > Subject: [PCB_FORUM] Re: swap functions with SPB16.01
> >
> > So it is an allegro problem, not concept.
> >
> > No messages or warning in netrev.lst in 16.01?
> >
> > Jean-Charles
> > William Billereau a écrit :
> > > Just a little thing:
> > >
> > > I sent to Cadence a single archived project.
> > > One schematic.
> > > The packaging of this schematic.
> > > 2 different BRD files:
> > > SPB157.brd and SPB160.brd
> > >
> > > Both are netrev'ed with the same packaging.
> > > In spb157.brd I can swap, in spb160.brd, I cannot...
> > >
> > >   William.
> > >
> > >
> > >
> > >> -----Original Message-----
> > >> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-
> > >> bounce@xxxxxxxxxxxxx] On Behalf Of Jean-Charles TEYSSIER
> > >> Sent: 02 June, 2008 5:39 PM
> > >> To: icu-pcb-forum@xxxxxxxxxxxxx
> > >> Subject: [PCB_FORUM] Re: swap functions with SPB16.01
> > >>
> > >> Hi William,
> > >>
> > >> just an idea: do you try to remove this component in concept and
> add
> > it
> > >> again?
> > >>
> > >> Jean-Charles
> > >>
> > >>
> > >> William Billereau a écrit :
> > >>
> > >>> Hello All.
> > >>>
> > >>> I have a problem with SPB16.01.
> > >>>
> > >>> I have a component AD8017 which is defined as a double
> operational
> > >>> amplifier.
> > >>>
> > >>> So it's 2 gates.
> > >>>
> > >>> in 15.7, in Allegro it is fully swappable.
> > >>>
> > >>> In 16.01, it is not:
> > >>>
> > >>> W- (SPMHA2-23): No functions are swappable with the selected
> > function
> > >>> ... pick again.
> > >>>
> > >>> I sent a CCR to Cadence to notify this problem.
> > >>>
> > >>> I first have an answer of somebody that replied she can reproduce
> > the
> > >>> problem and then send it to Cadence R&D.
> > >>>
> > >>> Few weeks later, a PCR is applied in the
> > >>> Hotfix_SPB16.01.008_wint_1of1.exe:
> > >>>
> > >>> README_PCR.txt: 553514 ALLEGRO_EDITOR SCHEM_FTB function swapping
> > not
> > >>> working in 16.01 which was working in 15.7.
> > >>>
> > >>> I install the hotfix, the problem was still there.
> > >>>
> > >>> I check the CCR status, it says : Checked_in
> > >>>
> > >>> According to status description in CCR status help:
> > >>>
> > >>> *Checked_In* /(formerly Fixed)/
> > >>>
> > >>>
> > >>>
> > >>> The requested product change has been implemented by the product
> > >>> development team and is awaiting internal verification.
> > >>>
> > >>> So I wait that the CCR Status passes to another one such as
> > >>>
> > >> validated,
> > >>
> > >>> closed...
> > >>>
> > >>> I received the Sourcelink newsletter and in the bottom I saw
> this:
> > >>>
> > >>> 1
> > >>>
> > >>>
> > >>>
> > >>> 41122300
> > >>>
> > >>>
> > >>
> >
> <http://sourcelink.cadence.com/en/ccscase/CaseEdit.jhtml?case=41122300&;
> > >> mode=notification>
> > >>
> > >>>
> > >>> Closed
> > >>>
> > >>>
> > >>>
> > >>> C1 553514 : function swapping not working in 16.01 which was
> > working
> > >>> in 15.7
> > >>>
> > >>>
> > >>>
> > >>> 2-Important
> > >>>
> > >>>
> > >>>
> > >>> 2008-04-15
> > >>>
> > >>>
> > >>>
> > >>> 2008-05-12
> > >>>
> > >>>
> > >>>
> > >>> 553514
> > >>>
> > >>>
> > >>
> >
> <http://sourcelink.cadence.com/en/ccscase/PcrView.jhtml?pcrListId=55351
> > >>
> > 4:41122300&mode=notification&SectionTitle=View+CCRs&SRPage=ViewMyPCR>
> > >>
> > >>> The 41122300 link returns this:
> > >>>
> > >>>
> > >>>
> > >>
> >
> https://sourcelink.cadence.com/en/ccscase/CaseEdit.jhtml?case=41122300&;
> > >> mode=notification
> > >>
> > >>
> >
> <https://sourcelink.cadence.com/en/ccscase/CaseEdit.jhtml?case=41122300
> > >> &mode=notification>
> > >>
> > >>> where it is said that this is a closed Service Request.
> > >>>
> > >>> But I am still not able to swap!
> > >>>
> > >>> I tried to package again not better.
> > >>>
> > >>> I cannot swap functions with any swappable component.
> > >>>
> > >>> Anybody else has this with 16.01? I would be surprised if nobody
> > >>>
> > >> swaps!
> > >>
> > >>> A guy there went on a Cadence seminar close to here and discussed
> > the
> > >>> problem.
> > >>>
> > >>> Someone told him that it can be a mouse setup problem....
> > >>>
> > >>> I am very surprised to hear something like this, but why not...
> > >>>
> > >>> I am quite sure that it cannot be such stupid thing.... (why
> > Cadence
> > >>>
> > >> did
> > >>
> > >>> not reply about that in this case?)
> > >>>
> > >>> May I wait more to really see the PCR implemented?
> > >>>
> > >>> (it is formerly closed somewhere, "checked_in" in my personal
> > >>> information and planned to be corrected in 16.1 (in CCR detail)
> > which
> > >>> is not planned at all in Cadence Review Schedule!
> > >>>
> > >>>
> > >>>
> > >>
> >
> https://sourcelink.cadence.com/docs/files/lifecycle/Release_Schedule.ht
> > >> ml)
> > >>
> > >>> Thanks for any help.
> > >>>
> > >>> */William Billereau/*/
> > >>> CERN group TS / DEM
> > >>> 1211 Genève 23 Suisse///
> > >>>
> > >>>
> > >>>
> > >>> /
> > >>> Tel: (+4122) 76 73403// //
> > >>> mail to: william.billereau@xxxxxxx
> > >>>
> > >> <mailto:william.billereau@xxxxxxx>///
> > >>
> > >> -----------------------------------------------------------
> > >> To subscribe/unsubscribe:
> > >> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> > >> with a subject of subscribe or unsubscribe
> > >>
> > >> To view the archives of this list go to
> > >> http://www.freelists.org/archives/icu-pcb-forum/
> > >>
> > >> Problems or Questions:
> > >> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> > >> -----------------------------------------------------------
> > >>
> > > -----------------------------------------------------------
> > > To subscribe/unsubscribe:
> > > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> > > with a subject of subscribe or unsubscribe
> > >
> > > To view the archives of this list go to
> > http://www.freelists.org/archives/icu-pcb-forum/
> > >
> > > Problems or Questions:
> > > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> > > -----------------------------------------------------------
> > >
> > >
> > -----------------------------------------------------------
> > To subscribe/unsubscribe:
> > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> > with a subject of subscribe or unsubscribe
> >
> > To view the archives of this list go to
> > http://www.freelists.org/archives/icu-pcb-forum/
> >
> > Problems or Questions:
> > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> > -----------------------------------------------------------
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
> 
> To view the archives of this list go to
> http://www.freelists.org/archives/icu-pcb-forum/
> 
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: