[PCB_FORUM] Re: swap functions with SPB16.01

Or a netrev problem ;-)

No error or warnings in netrev.lst.
Just a strange thing (Missing symbol has error FALSE) in the netrev.lst:
(I am investigating this on Sourcelink...)
I also have to check if it is the same thing with 15.7.
I will compare files.


        William.

Cadence Design Systems, Inc. netrev 16.01 Mon Jun 02 18:28:18 2008
(C) Copyright 2002 Cadence Design Systems, Inc.

------ Directives ------

RIPUP_ETCH FALSE;
RIPUP_SYMBOLS ALWAYS;
Missing symbol has error FALSE;
SCHEMATIC_DIRECTORY '..\packaged';
BOARD_DIRECTORY '';
OLD_BOARD_NAME 'C:/EDA/lib_archive/worklib/lib/physical/spb160.brd';
NEW_BOARD_NAME 'C:/EDA/lib_archive/worklib/lib/physical/spb160.brd';

CmdLine: netrev -$ -i ..\packaged -l -u -y 1 -z 
C:/EDA/lib_archive/worklib/lib/physical/#Taaaaaa01376.tmp

------ Preparing to read pst files ------

Starting to read ../packaged/pstchip.dat 
   Finished reading ../packaged/pstchip.dat (00:00:00.21)
Starting to read ../packaged/pstxprt.dat 
   Finished reading ../packaged/pstxprt.dat (00:00:00.00)
Starting to read ../packaged/pstxnet.dat 
   Finished reading ../packaged/pstxnet.dat (00:00:00.00)

------ Oversights/Warnings/Errors ------


------ Library Paths ------

> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-
> bounce@xxxxxxxxxxxxx] On Behalf Of Jean-Charles TEYSSIER
> Sent: 02 June, 2008 6:22 PM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: swap functions with SPB16.01
> 
> So it is an allegro problem, not concept.
> 
> No messages or warning in netrev.lst in 16.01?
> 
> Jean-Charles
> William Billereau a écrit :
> > Just a little thing:
> >
> > I sent to Cadence a single archived project.
> > One schematic.
> > The packaging of this schematic.
> > 2 different BRD files:
> > SPB157.brd and SPB160.brd
> >
> > Both are netrev'ed with the same packaging.
> > In spb157.brd I can swap, in spb160.brd, I cannot...
> >
> >     William.
> >
> >
> >
> >> -----Original Message-----
> >> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-
> >> bounce@xxxxxxxxxxxxx] On Behalf Of Jean-Charles TEYSSIER
> >> Sent: 02 June, 2008 5:39 PM
> >> To: icu-pcb-forum@xxxxxxxxxxxxx
> >> Subject: [PCB_FORUM] Re: swap functions with SPB16.01
> >>
> >> Hi William,
> >>
> >> just an idea: do you try to remove this component in concept and add
> it
> >> again?
> >>
> >> Jean-Charles
> >>
> >>
> >> William Billereau a écrit :
> >>
> >>> Hello All.
> >>>
> >>> I have a problem with SPB16.01.
> >>>
> >>> I have a component AD8017 which is defined as a double operational
> >>> amplifier.
> >>>
> >>> So it's 2 gates.
> >>>
> >>> in 15.7, in Allegro it is fully swappable.
> >>>
> >>> In 16.01, it is not:
> >>>
> >>> W- (SPMHA2-23): No functions are swappable with the selected
> function
> >>> ... pick again.
> >>>
> >>> I sent a CCR to Cadence to notify this problem.
> >>>
> >>> I first have an answer of somebody that replied she can reproduce
> the
> >>> problem and then send it to Cadence R&D.
> >>>
> >>> Few weeks later, a PCR is applied in the
> >>> Hotfix_SPB16.01.008_wint_1of1.exe:
> >>>
> >>> README_PCR.txt: 553514 ALLEGRO_EDITOR SCHEM_FTB function swapping
> not
> >>> working in 16.01 which was working in 15.7.
> >>>
> >>> I install the hotfix, the problem was still there.
> >>>
> >>> I check the CCR status, it says : Checked_in
> >>>
> >>> According to status description in CCR status help:
> >>>
> >>> *Checked_In* /(formerly Fixed)/
> >>>
> >>>
> >>>
> >>> The requested product change has been implemented by the product
> >>> development team and is awaiting internal verification.
> >>>
> >>> So I wait that the CCR Status passes to another one such as
> >>>
> >> validated,
> >>
> >>> closed...
> >>>
> >>> I received the Sourcelink newsletter and in the bottom I saw this:
> >>>
> >>> 1
> >>>
> >>>
> >>>
> >>> 41122300
> >>>
> >>>
> >>
> <http://sourcelink.cadence.com/en/ccscase/CaseEdit.jhtml?case=41122300&;
> >> mode=notification>
> >>
> >>>
> >>> Closed
> >>>
> >>>
> >>>
> >>> C1 553514 : function swapping not working in 16.01 which was
> working
> >>> in 15.7
> >>>
> >>>
> >>>
> >>> 2-Important
> >>>
> >>>
> >>>
> >>> 2008-04-15
> >>>
> >>>
> >>>
> >>> 2008-05-12
> >>>
> >>>
> >>>
> >>> 553514
> >>>
> >>>
> >>
> <http://sourcelink.cadence.com/en/ccscase/PcrView.jhtml?pcrListId=55351
> >>
> 4:41122300&mode=notification&SectionTitle=View+CCRs&SRPage=ViewMyPCR>
> >>
> >>> The 41122300 link returns this:
> >>>
> >>>
> >>>
> >>
> https://sourcelink.cadence.com/en/ccscase/CaseEdit.jhtml?case=41122300&;
> >> mode=notification
> >>
> >>
> <https://sourcelink.cadence.com/en/ccscase/CaseEdit.jhtml?case=41122300
> >> &mode=notification>
> >>
> >>> where it is said that this is a closed Service Request.
> >>>
> >>> But I am still not able to swap!
> >>>
> >>> I tried to package again not better.
> >>>
> >>> I cannot swap functions with any swappable component.
> >>>
> >>> Anybody else has this with 16.01? I would be surprised if nobody
> >>>
> >> swaps!
> >>
> >>> A guy there went on a Cadence seminar close to here and discussed
> the
> >>> problem.
> >>>
> >>> Someone told him that it can be a mouse setup problem....
> >>>
> >>> I am very surprised to hear something like this, but why not...
> >>>
> >>> I am quite sure that it cannot be such stupid thing.... (why
> Cadence
> >>>
> >> did
> >>
> >>> not reply about that in this case?)
> >>>
> >>> May I wait more to really see the PCR implemented?
> >>>
> >>> (it is formerly closed somewhere, "checked_in" in my personal
> >>> information and planned to be corrected in 16.1 (in CCR detail)
> which
> >>> is not planned at all in Cadence Review Schedule!
> >>>
> >>>
> >>>
> >>
> https://sourcelink.cadence.com/docs/files/lifecycle/Release_Schedule.ht
> >> ml)
> >>
> >>> Thanks for any help.
> >>>
> >>> */William Billereau/*/
> >>> CERN group TS / DEM
> >>> 1211 Genève 23 Suisse///
> >>>
> >>>
> >>>
> >>> /
> >>> Tel: (+4122) 76 73403// //
> >>> mail to: william.billereau@xxxxxxx
> >>>
> >> <mailto:william.billereau@xxxxxxx>///
> >>
> >> -----------------------------------------------------------
> >> To subscribe/unsubscribe:
> >> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> >> with a subject of subscribe or unsubscribe
> >>
> >> To view the archives of this list go to
> >> http://www.freelists.org/archives/icu-pcb-forum/
> >>
> >> Problems or Questions:
> >> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> >> -----------------------------------------------------------
> >>
> > -----------------------------------------------------------
> > To subscribe/unsubscribe:
> > Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> > with a subject of subscribe or unsubscribe
> >
> > To view the archives of this list go to
> http://www.freelists.org/archives/icu-pcb-forum/
> >
> > Problems or Questions:
> > Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> > -----------------------------------------------------------
> >
> >
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
> 
> To view the archives of this list go to
> http://www.freelists.org/archives/icu-pcb-forum/
> 
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: