[PCB_FORUM] Re: swap functions with SPB16.01

So it is an allegro problem, not concept.

No messages or warning in netrev.lst in 16.01?

Jean-Charles
William Billereau a écrit :

Just a little thing:

I sent to Cadence a single archived project.
One schematic.
The packaging of this schematic.
2 different BRD files:
SPB157.brd and SPB160.brd

Both are netrev'ed with the same packaging.
In spb157.brd I can swap, in spb160.brd, I cannot...

        William.



-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-
bounce@xxxxxxxxxxxxx] On Behalf Of Jean-Charles TEYSSIER
Sent: 02 June, 2008 5:39 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: swap functions with SPB16.01

Hi William,

just an idea: do you try to remove this component in concept and add it
again?

Jean-Charles


William Billereau a écrit :

Hello All.

I have a problem with SPB16.01.

I have a component AD8017 which is defined as a double operational
amplifier.

So it's 2 gates.

in 15.7, in Allegro it is fully swappable.

In 16.01, it is not:

W- (SPMHA2-23): No functions are swappable with the selected function
... pick again.

I sent a CCR to Cadence to notify this problem.

I first have an answer of somebody that replied she can reproduce the
problem and then send it to Cadence R&D.

Few weeks later, a PCR is applied in the
Hotfix_SPB16.01.008_wint_1of1.exe:

README_PCR.txt: 553514 ALLEGRO_EDITOR SCHEM_FTB function swapping not
working in 16.01 which was working in 15.7.

I install the hotfix, the problem was still there.

I check the CCR status, it says : Checked_in

According to status description in CCR status help:

*Checked_In* /(formerly Fixed)/



The requested product change has been implemented by the product
development team and is awaiting internal verification.

So I wait that the CCR Status passes to another one such as

validated,

closed...

I received the Sourcelink newsletter and in the bottom I saw this:

1



41122300


<http://sourcelink.cadence.com/en/ccscase/CaseEdit.jhtml?case=41122300&;
mode=notification>


Closed



C1 553514 : function swapping not working in 16.01 which was working
in 15.7



2-Important



2008-04-15



2008-05-12



553514


<http://sourcelink.cadence.com/en/ccscase/PcrView.jhtml?pcrListId=55351
4:41122300&mode=notification&SectionTitle=View+CCRs&SRPage=ViewMyPCR>

The 41122300 link returns this:



https://sourcelink.cadence.com/en/ccscase/CaseEdit.jhtml?case=41122300&;
mode=notification
<https://sourcelink.cadence.com/en/ccscase/CaseEdit.jhtml?case=41122300 
&mode=notification>

where it is said that this is a closed Service Request.

But I am still not able to swap!

I tried to package again not better.

I cannot swap functions with any swappable component.

Anybody else has this with 16.01? I would be surprised if nobody

swaps!

A guy there went on a Cadence seminar close to here and discussed the
problem.

Someone told him that it can be a mouse setup problem....

I am very surprised to hear something like this, but why not...

I am quite sure that it cannot be such stupid thing.... (why Cadence

did

not reply about that in this case?)

May I wait more to really see the PCR implemented?

(it is formerly closed somewhere, "checked_in" in my personal
information and planned to be corrected in 16.1 (in CCR detail) which
is not planned at all in Cadence Review Schedule!



https://sourcelink.cadence.com/docs/files/lifecycle/Release_Schedule.ht
ml)

Thanks for any help.

*/William Billereau/*/
CERN group TS / DEM
1211 Genève 23 Suisse///



/
Tel: (+4122) 76 73403// //
mail to: william.billereau@xxxxxxx

<mailto:william.billereau@xxxxxxx>///
----------------------------------------------------------- 
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

-----------------------------------------------------------
To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx 
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------


-----------------------------------------------------------
To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx 
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: