[PCB_FORUM] Re: swap functions with SPB16.01

Just a little thing:

I sent to Cadence a single archived project.
One schematic.
The packaging of this schematic.
2 different BRD files:
SPB157.brd and SPB160.brd

Both are netrev'ed with the same packaging.
In spb157.brd I can swap, in spb160.brd, I cannot...

        William.


> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-
> bounce@xxxxxxxxxxxxx] On Behalf Of Jean-Charles TEYSSIER
> Sent: 02 June, 2008 5:39 PM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: swap functions with SPB16.01
> 
> Hi William,
> 
> just an idea: do you try to remove this component in concept and add it
> again?
> 
> Jean-Charles
> 
> 
> William Billereau a écrit :
> >
> > Hello All.
> >
> > I have a problem with SPB16.01.
> >
> > I have a component AD8017 which is defined as a double operational
> > amplifier.
> >
> > So it's 2 gates.
> >
> > in 15.7, in Allegro it is fully swappable.
> >
> > In 16.01, it is not:
> >
> > W- (SPMHA2-23): No functions are swappable with the selected function
> > ... pick again.
> >
> > I sent a CCR to Cadence to notify this problem.
> >
> > I first have an answer of somebody that replied she can reproduce the
> > problem and then send it to Cadence R&D.
> >
> > Few weeks later, a PCR is applied in the
> > Hotfix_SPB16.01.008_wint_1of1.exe:
> >
> > README_PCR.txt: 553514 ALLEGRO_EDITOR SCHEM_FTB function swapping not
> > working in 16.01 which was working in 15.7.
> >
> > I install the hotfix, the problem was still there.
> >
> > I check the CCR status, it says : Checked_in
> >
> > According to status description in CCR status help:
> >
> > *Checked_In* /(formerly Fixed)/
> >
> >
> >
> > The requested product change has been implemented by the product
> > development team and is awaiting internal verification.
> >
> > So I wait that the CCR Status passes to another one such as
> validated,
> > closed...
> >
> > I received the Sourcelink newsletter and in the bottom I saw this:
> >
> > 1
> >
> >
> >
> > 41122300
> >
> <http://sourcelink.cadence.com/en/ccscase/CaseEdit.jhtml?case=41122300&;
> mode=notification>
> >
> >
> >
> > Closed
> >
> >
> >
> > C1 553514 : function swapping not working in 16.01 which was working
> > in 15.7
> >
> >
> >
> > 2-Important
> >
> >
> >
> > 2008-04-15
> >
> >
> >
> > 2008-05-12
> >
> >
> >
> > 553514
> >
> <http://sourcelink.cadence.com/en/ccscase/PcrView.jhtml?pcrListId=55351
> 4:41122300&mode=notification&SectionTitle=View+CCRs&SRPage=ViewMyPCR>
> >
> >
> > The 41122300 link returns this:
> >
> >
> https://sourcelink.cadence.com/en/ccscase/CaseEdit.jhtml?case=41122300&;
> mode=notification
> >
> <https://sourcelink.cadence.com/en/ccscase/CaseEdit.jhtml?case=41122300
> &mode=notification>
> >
> > where it is said that this is a closed Service Request.
> >
> > But I am still not able to swap!
> >
> > I tried to package again not better.
> >
> > I cannot swap functions with any swappable component.
> >
> > Anybody else has this with 16.01? I would be surprised if nobody
> swaps!
> >
> > A guy there went on a Cadence seminar close to here and discussed the
> > problem.
> >
> > Someone told him that it can be a mouse setup problem....
> >
> > I am very surprised to hear something like this, but why not...
> >
> > I am quite sure that it cannot be such stupid thing.... (why Cadence
> did
> > not reply about that in this case?)
> >
> > May I wait more to really see the PCR implemented?
> >
> > (it is formerly closed somewhere, "checked_in" in my personal
> > information and planned to be corrected in 16.1 (in CCR detail) which
> > is not planned at all in Cadence Review Schedule!
> >
> >
> https://sourcelink.cadence.com/docs/files/lifecycle/Release_Schedule.ht
> ml)
> >
> > Thanks for any help.
> >
> > */William Billereau/*/
> > CERN group TS / DEM
> > 1211 Genève 23 Suisse///
> >
> >
> >
> > /
> > Tel: (+4122) 76 73403// //
> > mail to: william.billereau@xxxxxxx
> <mailto:william.billereau@xxxxxxx>///
> >
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
> 
> To view the archives of this list go to
> http://www.freelists.org/archives/icu-pcb-forum/
> 
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: