[PCB_FORUM] Re: sch4pins-pcb5pins

I would check the pstchip.dat file first for any occurances of PINCOUNT=
then look at the parts that do use it. I'm not sure if it will include
PINCOUNT when you output an (Orcad) Capture to Allegro netlist.

Hope this helps.

Mitch

>
> Mitch, How do i turn off pin count?
>
> Sam
>
>> From: "Mitch S. Morey" <cadpro2k@xxxxxxxxxx>
>> Date: 2005/11/07 Mon PM 01:26:39 EST
>> To: icu-pcb-forum@xxxxxxxxxxxxx
>> Subject: [PCB_FORUM] Re: sch4pins-pcb5pins
>>
>> As long as you don't have the "PINCOUNT" property on the schematic side,
>> you should be able to have differing pincounts, and Allegro will simply
>> ignore this as a warning reading the netlist. Only time I've had
>> problems
>> is when parts have the PINCOUNT property.
>>
>> Good day.
>>
>> Mitch
>>
>> >
>> > Hi Sam,
>> >
>> > The number of pins on the footprint should be the same
>> > as the number of pins on part in the schematic.
>> > In your case you need to add NC property on the
>> > schematic part. The value of the property should be
>> > the number of the pin ( same is on the foorprint)
>> >
>> > --- sjcharles@xxxxxxx wrote:
>> >
>>
>>
>>
>> -----------------------------------------
>> Stay ahead of the information curve.
>> Receive PCB news and jobs on your desktop daily.
>> Subscribe today to the PCB CafeNews newsletter.
>> [ http://www10.pcbcafe.com/nl/newsletter_subscribe.php ]
>> It's informative and essential.
>> -----------------------------------------------------------
>> To subscribe/unsubscribe:
>>      Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
>>      with a subject of subscribe or unsubscribe
>>
>> To view the archives of this list please login at
>> http://www.freelists.org. Our list name is icu-pcb-forum
>> or go to http://www.freelists.org/archives/icu-pcb-forum/
>>
>> Problems or Questions:
>>      Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
>>
>> Want to post a job listing ?  DON'T DO IT HERE!
>> Better yet, join our jobs listing forum.
>>
>> SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
>> POST:       icu-jobs-forum@xxxxxxxxxx
>> -----------------------------------------------------------
>>
>
> -----------------------------------------------------------
> To subscribe/unsubscribe:
>       Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
>       with a subject of subscribe or unsubscribe
>
> To view the archives of this list please login at
> http://www.freelists.org. Our list name is icu-pcb-forum
> or go to http://www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
>       Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
>
> Want to post a job listing ?  DON'T DO IT HERE!
> Better yet, join our jobs listing forum.
>
> SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
> POST:       icu-jobs-forum@xxxxxxxxxx
> -----------------------------------------------------------
>



-----------------------------------------
Stay ahead of the information curve.
Receive PCB news and jobs on your desktop daily.
Subscribe today to the PCB CafeNews newsletter.
[ http://www10.pcbcafe.com/nl/newsletter_subscribe.php ]
It's informative and essential.
-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: