[PCB_FORUM] Re: resetting line widths to default...
- From: "Austin Franklin" <austin@xxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Wed, 16 Mar 2005 19:38:09 -0500
Hi Andrew,
You are right, it is there. Thank you. I never thought to look for a SKILL
routine to do this, I figured this should be do-able in the program it self,
and I know I can by selecting them individually and I'm sure at least a few
other more efficient ways. I guess I can select, using constraints manager,
all the nets that aren't part of a group (thus all the default nets), and
apply a width change to them all that way. Hum, sounds like a winner. I'll
have to learn more about SKILL routines, now that my proficiency with
Allegro is growing rapidly.
Regards,
Austin
> -----Original Message-----
> From: Andrew Noonan [mailto:andrew@xxxxxxxxxxx]
> Sent: Wednesday, March 16, 2005 6:30 PM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: resetting line widths to default...
>
>
> Austin... Funny you should mention this; I'm using this skill program at
> this moment. Do you know if you have the 'cwidth.il' program?
> It's a great tool (a little slow on large numbers of clines), but will
> identify all cline widths on a per-layer basis, and allow you to make
> global changes to another line with, again on a per layer basis.
> Check it out. It should be part of the package of programs found on
> Sourcelink.
>
> Andrew
>
> -----Original Message-----
> From: Austin Franklin [mailto:austin@xxxxxxxxxxxx]
> Sent: Wednesday, March 16, 2005 3:25 PM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] resetting line widths to default...
>
>
> Hi,
>
> I am working on a board that is a re-spin. I've changed the line
> widths,
> both default and made new line width rules for specific groups. My
> default
> width is 3.99...but nets in the default group route at 4.57, 8 and other
> misc. line widths, apparently from the previous spin. How can I reset,
> say,
> the default group line width to apply to all the nets not in another
> group?
>
> Having a line width of 8 on a net that has a rule of 3.99 and a min of
> 3.99
> (no max can be specified) does not create a DRC error, obviously...so it
> isn't obvious on some of the nets that they aren't following the new
> default
> rule.
>
> Thanks,
>
> Austin
>
>
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list please login at
> //www.freelists.org. Our list name is icu-pcb-forum
> or go to //www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
>
> Want to post a job listing ? DON'T DO IT HERE!
> Better yet, join our jobs listing forum.
>
> SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
> POST: icu-jobs-forum@xxxxxxxxxx
> -----------------------------------------------------------
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list please login at
> //www.freelists.org. Our list name is icu-pcb-forum
> or go to //www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
>
> Want to post a job listing ? DON'T DO IT HERE!
> Better yet, join our jobs listing forum.
>
> SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
> POST: icu-jobs-forum@xxxxxxxxxx
> -----------------------------------------------------------
>
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list please login at
//www.freelists.org. Our list name is icu-pcb-forum
or go to //www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
Want to post a job listing ? DON'T DO IT HERE!
Better yet, join our jobs listing forum.
SUBSCRIBE: icu-jobs-forum-subscribe@xxxxxxxxxx
POST: icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
Other related posts:
