[PCB_FORUM] Re: reset origin...
- From: "Austin Franklin" <allegrolist@xxxxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Wed, 19 Mar 2008 00:38:53 -0500
Hi Nagaraj,
It works fine, except for one thing...after I select the pin, it zooms way
out! Any way to stop that from happening?
Best Regards,
Austin
> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Shanmugam,
> Nagaraj
> Sent: Tuesday, March 18, 2008 11:00 PM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: reset origin...
>
>
> Load this skill program and this helps you to set your origin to any
> elements on layout.
>
> To load the skill type in allegro command line
> Skill load("vc_SetOrigin.il")
>
> Once loaded type setorigin in allegro command line to execute the skill.
>
> Best of luck!!
>
> Thanks,
> Nagaraj.
>
> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
> Sent: Wednesday, March 19, 2008 10:17 AM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] reset origin...
>
> Hi,
>
> I want to reset the origin to a pad on a specific part. I know the
> location
> of that pad by doing a "show element" on that pad. I tried entering the
> XY
> coordinates in "Setup/Drawing Size/Move Origin" and when I enter the X
> (or
> Y) value, then click on the other entry box, it zeros out the value I
> just
> entered. I *though* it worked once...but I can't get it to work. 15.2,
> last HotFix.
>
> What am I doing wrong? Or, is there an easier way to move the origin to
> a
> component pin?
>
> Austin
>
> -----------------------------------------------------------
> To subscribe/unsubscribe:
> Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> with a subject of subscribe or unsubscribe
>
> To view the archives of this list go to
> //www.freelists.org/archives/icu-pcb-forum/
>
> Problems or Questions:
> Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> -----------------------------------------------------------
>
-----------------------------------------------------------
To subscribe/unsubscribe:
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe
To view the archives of this list go to
//www.freelists.org/archives/icu-pcb-forum/
Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
Other related posts:
