[PCB_FORUM] Re: reset origin...

Load this skill program and this helps you to set your origin to any
elements on layout.

To load the skill type in allegro command line 
Skill load("vc_SetOrigin.il")

Once loaded type setorigin in allegro command line to execute the skill.

Best of luck!!

Thanks,
Nagaraj.

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Austin Franklin
Sent: Wednesday, March 19, 2008 10:17 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] reset origin...

Hi,

I want to reset the origin to a pad on a specific part.  I know the
location
of that pad by doing a "show element" on that pad.  I tried entering the
XY
coordinates in "Setup/Drawing Size/Move Origin" and when I enter the X
(or
Y) value, then click on the other entry box, it zeros out the value I
just
entered.  I *though* it worked once...but I can't get it to work.  15.2,
last HotFix.

What am I doing wrong?  Or, is there an easier way to move the origin to
a
component pin?

Austin

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: