[PCB_FORUM] Re: plotting issue

I don't have the answer, but you're not alone. I was having the same problem
in AutoCAD. I'm not sure exactly how I fixed it because I fooled around with
it so much. I think it had to do with the plotter configuration file. It can
be very frustrating. Until I solved it I just rotated it in the pdf file and
printed it from there.

Good Luck!
Diane

-----Original Message-----
From: Sawyer Jayne [mailto:Jayne.Sawyer@xxxxxxxxxxx]
Sent: Thursday, January 20, 2005 11:56 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] plotting issue



I have never posted anything here before so I hope this works.

We are having problems with plotting the hierarchy from Concept HDL
v15.2-s008. 
It is rather difficult to explain: 
First off, when plotting "active page", "all" or any of those options
everything works as it should. 
But when you select the hierarchy button:
*       changed printer will not hold 
                (If I plotted to a printer and then change to the PDF driver
it still goes to the printer and once it gets locked into one or the other
it will not change ever)
*       the landscape rotation is lost (it prints portrait in the middle of
the B size paper ... yes I double and triple checked that landscape was
selected and the printer dialog showed the adjustment and tried other
rotation options)
*       it doesn't place the PDF file in the current design it defaulted to
a previous design

We have 3 site running 15.2. Each site has it's own license and applications
server. These issues are being experienced at only one site but when I map
over to their servers (from a remote site) I experience the same issues. The
issues are not user or design dependent. Concept 15.1, run at the same site,
same servers, works fine. Because V15.1 works and other apps are not having
problems it appears to be an issue in the installation. But since the same
installation is working fine at the other 2 sites, it would appear to be the
environment.

Has any one experienced anything like this?

Or have any suggestions?

Thanks in advance,
Jayne Sawyer
Thomson Corp. Grass Valley 
-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: