[PCB_FORUM] Re: pin to pin checks

Hi Rachel,
You can put a "NODRC_SYM_SAME_PIN" property on the board, not to have to use many constraint areas. 

Jean.


Rachel Bremner wrote:


Hi All,
We are not using placement outlines on our library symbols so we don't get drc's. I want to do a pin to pin spacing check since we have no outlines to check to. Is there an easy way to check pin to pin spacing between differing symbols and not have it check the pin to pin within the same device? We don't really want to go through the whole board and put in constraint areas on each fine-pitch part. We've always had this built into the placement outlines, so it wasn't an issue before. 

Thanks,
Rachel

_________________________________________________________________
Stay in touch with old friends and meet new ones with Windows Live Spaces http://clk.atdmt.com/MSN/go/msnnkwsp0070000001msn/direct/01/?href=http://spaces.live.com/spacesapi.aspx?wx_action=create&wx_url=/friends.aspx&mkt=en-us 

-----------------------------------------------------------
To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx 
with a subject of subscribe or unsubscribe
To view the archives of this list go to http://www.freelists.org/archives/icu-pcb-forum/ 

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------
--------------------------------------------------------------------------------------- Orange vous informe que cet e-mail a ete controle par l'anti-virus mail. Aucun virus connu a ce jour par nos services n'a ete detecte. 





-----------------------------------------------------------
To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx 
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: