[PCB_FORUM] Re: pcb-si vias

we have a routed board and selected the trace. The trace has two vias. but when 
we simulate the vias are there. How or do we define the vias as being a part of 
the signal?
Thanks
> 
> From: "David Greig" <david@xxxxxxxxxxxxxx>
> Date: 2005/02/28 Mon AM 10:52:30 EST
> To: <icu-pcb-forum@xxxxxxxxxxxxx>
> Subject: [PCB_FORUM] Re: pcb-si vias
> 
> SI 630 uses a 3D field solver - a built in solution from Optimal. Via's and
> ground plane holes are modelled (unlike many other packages) 
> 
> 
> Best Regards
>  
> David Greig
> ______________________________
> GigaDyne Ltd
> Buchan House
> Carnegie Campus
> Dunfermline KY11 8PL
> United Kingdom
> t: +44 (0)1383 624 975
> ______________________________
> 
> -----Original Message-----
> From: sjcharles@xxxxxxx [mailto:sjcharles@xxxxxxx] 
> Sent: 28 February 2005 15:33
> To: icu-pcb-forum@xxxxxxxxxxxxx; icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] Re: pcb-si vias
> 
> Does the si tool simulate vias? We're using 15.2 thanks
> > 
> > From: "Kevin Buchanan" <buck@xxxxxxx>
> > Date: 2005/02/24 Thu PM 04:00:12 EST
> > To: <icu-pcb-forum@xxxxxxxxxxxxx>
> > Subject: [PCB_FORUM] Re: pcb-si
> > 
> > Sam,
> > 
> >    PCB-SI is the renamed SpecctraQuest Signal Integrity (SI) Analysis 
> > product.
> > The front end works very similar to allegro. It is used for floor 
> > planning, initial stack up analysis and Signal integrity.
> > 
> >    The SI portions of the tool has a very large learning curve. I hope 
> > you have time to learn modeling and simulation.
> > 
> > Buck...
> > 
> > -----Original Message-----
> > From: sjcharles@xxxxxxx [mailto:sjcharles@xxxxxxx]
> > Sent: Thursday, February 24, 2005 3:42 PM
> > To: icu-pcb-forum@xxxxxxxxxxxxx
> > Subject: [PCB_FORUM] pcb-si
> > 
> > 
> > we have this pcb-si, but no one to drive it. Is it necessary to have 
> > concept HDL to run pcb-si? Also where is a good place to start 
> > learning this
> > 
> > Thanks in advance
> > Sam
> > 
> > -----------------------------------------------------------
> > To subscribe/unsubscribe: 
> >     Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> >     with a subject of subscribe or unsubscribe
> > 
> > To view the archives of this list please login at
> http://www.freelists.org.
> > Our list name is icu-pcb-forum or go to 
> > http://www.freelists.org/archives/icu-pcb-forum/
> > 
> > Problems or Questions:
> >     Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> > 
> > Want to post a job listing ?  DON'T DO IT HERE!  
> > Better yet, join our jobs listing forum.
> > 
> > SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
> > POST:       icu-jobs-forum@xxxxxxxxxx
> > -----------------------------------------------------------
> > 
> > -----------------------------------------------------------
> > To subscribe/unsubscribe: 
> >     Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
> >     with a subject of subscribe or unsubscribe
> > 
> > To view the archives of this list please login at 
> > http://www.freelists.org. Our list name is icu-pcb-forum or go to 
> > http://www.freelists.org/archives/icu-pcb-forum/
> > 
> > Problems or Questions:
> >     Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> > 
> > Want to post a job listing ?  DON'T DO IT HERE!  
> > Better yet, join our jobs listing forum.
> > 
> > SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
> > POST:       icu-jobs-forum@xxxxxxxxxx
> > -----------------------------------------------------------
> > 
> 
> -----------------------------------------------------------
> To subscribe/unsubscribe: 
>       Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
>       with a subject of subscribe or unsubscribe
> 
> To view the archives of this list please login at http://www.freelists.org.
> Our list name is icu-pcb-forum or go to
> http://www.freelists.org/archives/icu-pcb-forum/
> 
> Problems or Questions:
>       Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> 
> Want to post a job listing ?  DON'T DO IT HERE!  
> Better yet, join our jobs listing forum.
> 
> SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
> POST:       icu-jobs-forum@xxxxxxxxxx
> -----------------------------------------------------------
> --
> Virus scanned by Lumison.
> 
> 
> -----------------------------------------------------------
> To subscribe/unsubscribe: 
>       Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
>       with a subject of subscribe or unsubscribe
> 
> To view the archives of this list please login at
> http://www.freelists.org. Our list name is icu-pcb-forum
> or go to http://www.freelists.org/archives/icu-pcb-forum/
> 
> Problems or Questions:
>       Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> 
> Want to post a job listing ?  DON'T DO IT HERE!  
> Better yet, join our jobs listing forum.
> 
> SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
> POST:       icu-jobs-forum@xxxxxxxxxx
> -----------------------------------------------------------
> 

-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: