[PCB_FORUM] Re: pcb-si

Thanks to all who've answered, we've simulated one net, thanks to an cadence 
FAE. All the real work is done in pcb-si. Very cool.
Sam
"richard moffat" <richard.moffat@xxxxxxxxxxxxxxxxxxx> wrote:

>At the basic level, SI is extremely useful for defining topologies (i.e.
>the order in which nets are routed.)  I would suggest you start with
>this before you move on to full-blown simulation.
>
>We don't have Concept (we use ViewDraw) and it can still be used
>perfectly alright.  OK, there may be a couple of glitches like "you
>should always do 'this' after you load in a netlist", but it's fairly
>straightforward.
>
>BTW, the training manual for SI is about 500 pages.
>
>Cheers,
>Richard
>
>>>> sjcharles@xxxxxxx 25/02/2005 9:42:15 a.m. >>>
>we have this pcb-si, but no one to drive it. Is it necessary to have
>concept HDL to run pcb-si? Also where is a good place to start learning
>this
>
>Thanks in advance
>Sam
>
>-----------------------------------------------------------
>To subscribe/unsubscribe: 
>    Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx 
>    with a subject of subscribe or unsubscribe
>
>To view the archives of this list please login at
>http://www.freelists.org. Our list name is icu-pcb-forum
>or go to http://www.freelists.org/archives/icu-pcb-forum/ 
>
>Problems or Questions:
>    Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx 
>
>Want to post a job listing ?  DON'T DO IT HERE!  
>Better yet, join our jobs listing forum.
>
>SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx 
>POST:       icu-jobs-forum@xxxxxxxxxx 
>-----------------------------------------------------------
>
>NOTICE: This message contains privileged and confidential
>information intended only for the use of the addressee
>named above. If you are not the intended recipient of
>this message you are hereby notified that you must not
>disseminate, copy or take any action in reliance on it.
>If you have received this message in error please
>notify Allied Telesyn Research Ltd immediately.
>Any views expressed in this message are those of the
>individual sender, except where the sender has the
>authority to issue and specifically states them to
>be the views of Allied Telesyn Research.
>-----------------------------------------------------------
>To subscribe/unsubscribe: 
>    Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
>    with a subject of subscribe or unsubscribe
>
>To view the archives of this list please login at
>http://www.freelists.org. Our list name is icu-pcb-forum
>or go to http://www.freelists.org/archives/icu-pcb-forum/
>
>Problems or Questions:
>    Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
>
>Want to post a job listing ?  DON'T DO IT HERE!  
>Better yet, join our jobs listing forum.
>
>SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
>POST:       icu-jobs-forum@xxxxxxxxxx
>-----------------------------------------------------------
>

__________________________________________________________________
Switch to Netscape Internet Service.
As low as $9.95 a month -- Sign up today at http://isp.netscape.com/register

Netscape. Just the Net You Need.

New! Netscape Toolbar for Internet Explorer
Search from anywhere on the Web and block those annoying pop-ups.
Download now at http://channels.netscape.com/ns/search/install.jsp
-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: