[PCB_FORUM] Re: pastemask reliefs over shapes

I can't speak for anyone else, but I make them a pin.
A multidrill one. It works out well. I tried to not add
an internal pad because the holes would attach to ground
but if you have drills and no pads the router does not see
the drills and routes right through them. That I discovered
by accident, thankfully BEFORE I sent the design out.
They need all of the pin stuff so it just made the most
sense to me to do it this way.

Kevin McCowan
Sr. PCB Designer
TSI Telsys

westfeldt wrote:
How do people handle pastemask patterns over the csp thermal/mech shapes in the middle of the chip?. Use existing subclass, make new subclass using _top and _bottom?

Patrick Westfeldt, Jr.
North Boulder Circuit Design
westfeldt_nbcd@xxxxxxxxx
720-406-0887
c 720-272-5822

-----------------------------------------------------------
To subscribe/unsubscribe: Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ? DON'T DO IT HERE! Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: