[PCB_FORUM] Re: pastemask reliefs over shapes

   Another recommendation would be to add pins in this area to function as
   vias to make the internal plane connection, and then add a via keepout
   area equal to the pastemask opening. A stray via in the pastemask area
   will be shorted to the thermal shape through the solderpaste, and the DRC
   check will not catch it.

   Regards, David - dsmyser@xxxxxxxxxx

> 
> We make a new subclass under Package Geometry to handle this issue. 
> Either Pastemask_Top or Pastemask_Bottom as need be.
> 
> westfeldt wrote:
> 
> > How do people handle pastemask patterns over the csp thermal/mech shapes in
> > the middle of the chip?.  Use existing subclass, make new subclass using
> > _top and _bottom?
> > 
> > Patrick Westfeldt, Jr.
> 

-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: