[PCB_FORUM] Re: padstack question

Thanks for the replies!

I agree, it doesn't create a problem in the gerbers, but I've been having
problems using Testprep and thought this issue might be causing the
problem....

Carolyn

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Naren
Sent: Thursday, July 28, 2005 1:52 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: padstack question


I have also same problem!

But it does not create problem in gerbers.


Dharma Kemp-Bresett said:
> I have a similar problem but reversed I save the padstack as single and it
> opens as blind/buried. I never figured out the problem I just always make
> sure the right one is checked when I save......
> Dharma
>
> -----Original Message-----
> From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
> [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
> Carolyn.Schaefer@xxxxxxxxxx
> Sent: Wednesday, July 27, 2005 1:06 PM
> To: icu-pcb-forum@xxxxxxxxxxxxx
> Subject: [PCB_FORUM] padstack question
>
>
>
> Working in 14.2, Windows
>
> I have a padstack called "testpad" which when I open it in the padstack
> editor is defined as type "single".  However, when I query/edit design
> padstack for the "testpad" in the board file it's being used the type
> shows
> up as "blind/buried".  When I do the same for other smt pads in the board
> file, they show up as type "blind/buried" also even though when I open
> them
> in the padstack editor they are defined as type "single".
>
> Any ideas as to how to solve this problem or why it's happening?
>
> Or is this normal?
>
> Regards,
>
> Carolyn
>
>
>
>

-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: