[PCB_FORUM] Re: package order

Mike, 

If only it would, it would be wonderful!

That's what I call instance number a). And it does NOT follow it to package.
I checked it with some examples. If you made another experience please tell
me. Maybe I have to configure some switch to make it happen.

I bet for the geometrical positioning within the page, as if it would scan
up-down left-right the components. 

But the order how it gets into hierarchical blocks is still unclear to me.

Does anybody use Module Order with success? What for?

Carlos

>>-----Mensaje original-----
>>De: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-
>>bounce@xxxxxxxxxxxxx] En nombre de gnieski_mike@xxxxxxx
>>Enviado el: miércoles, 21 de marzo de 2007 14:18
>>Para: icu-pcb-forum@xxxxxxxxxxxxx
>>Asunto: [PCB_FORUM] Re: package order
>>
>>      I believe the packager follows the path property for
>>      assigning, every time you put a component down it and
>>      save the schematic it assigns a path number. If you delete
>>      a comp and replace it with another comp a different path
>>      will show. Not sure if there is any other way to control this
>>      other than a hard location.
>>
>>      Mike
>>
>>
>>-----Original Message-----
>>From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-
>>bounce@xxxxxxxxxxxxx] On Behalf Of cbelio
>>Sent: Wednesday, March 21, 2007 8:14 AM
>>To: icu-pcb-forum@xxxxxxxxxxxxx
>>Subject: [PCB_FORUM] package order
>>
>>
>>Hi people,
>>
>>does anybody know what is the order the packager follows to assign REFDES
>>to
>>the instances drawn in Concept?
>>
>>If I place many Capacitors on a page does it assign C1, C2, C3...
>>following
>>
>>a) instance number?
>>b) geometrical rules?
>>c) the order I drew the capacitors?
>>
>>It becomes specially complicated to follow when I use hierarchies.
>>
>>It seems to fulfill complete hierarchy levels before going down into the
>>next one, but I don't get what block is packaged first if there are
>>several
>>on the same page.
>>
>>I have been playing around with the Module_order menu but it does not seem
>>to control it.
>>
>>Any idea?
>>
>>Carlos Belío
>>Hardware Engineer
>>Telnet RI
>>
>>-----------------------------------------------------------
>>To subscribe/unsubscribe:
>>Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
>>with a subject of subscribe or unsubscribe
>>
>>To view the archives of this list go to
>>http://www.freelists.org/archives/icu-pcb-forum/
>>
>>Problems or Questions:
>>Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
>>-----------------------------------------------------------
>>
>>-----------------------------------------------------------
>>To subscribe/unsubscribe:
>>Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
>>with a subject of subscribe or unsubscribe
>>
>>To view the archives of this list go to
>>http://www.freelists.org/archives/icu-pcb-forum/
>>
>>Problems or Questions:
>>Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
>>-----------------------------------------------------------

-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: