[PCB_FORUM] Re: odb instead of gerber

I am not seeing the check box in either psd 15.1 or spb 15.2 when going
to File -> Export -> ODB++ Inside. The export window for ODB++ says it
is using version "7.5.0 R3". Can you direct me to where this check box
would be?

 

Thanks

Daniel So

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Chris Brennan
Sent: Thursday, July 14, 2005 7:22 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: RE: [PCB_FORUM] Re: odb instead of gerber

 

There's a check box to in the odb++ form to enable filling of silk
shapes.

 

CJB

 

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx on behalf of Michael Ben-Atar
Sent: Thu 7/14/2005 7:07 AM
To: 'icu-pcb-forum@xxxxxxxxxxxxx'
Subject: [PCB_FORUM] Re: odb instead of gerber

Hello Everyone
i am working also with odb++  .
it's thrue that it is only one file to the manufacturing fab . if you
want
to replace a single gerber layer you have to send all the odb again
and the factory doesn't like it.
on the silkscreen all the shapes are not solid .

michael

-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of Eric Hufstedler
Sent: Thursday, July 14, 2005 12:28 AM
To: Cadence Users Forum (E-mail)
Subject: [PCB_FORUM] odb instead of gerber


Maybe this will be helpful to some. I know a lot of you already send
odb++
to fab instead of gerbers, but i just now started.

I am still on the 1st one, so i have yet to see if any problems arise,
but here are some advantages for those not aware:

- There is only one file, and many fewer clicks to generate it.
- Importing into ViewMate is faster.  ViewMate is a free viewer.
- IPC netlist is included.
- Printing the drill file from ViewMate is much nicer (you see actual
drill
size)

Some of these may be seen as just helping ViewMate, but that's what i
use
here.

eric
-----------------------------------------------------------
To subscribe/unsubscribe:
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE! 
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe:
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE! 
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: