Yes, use 6x00. For some reason, cadence names it for the old gerber plotter controller model number :) perl -v allegro2all.pl -- George Patrick Tektronix, Inc. Central Engineering, EDS Applications Support P.O. Box 500, M/S 39-512 Beaverton, OR 97077-0001 * 503-627-5272 (voice) * 503-627-5587 (fax) http://www.tektronix.com<http://www.tektronix.com/> http://www.pcb-designer.com<http://www.pcb-designer.com/> "Off-Grid and Proud of it!" -----Original Message----- From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Mark Salberg Sent: Wednesday, May 14, 2008 10:20 To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: non allegro rs274x gerbers into allegro? Thanks George! I fwd this to the vendor which has Valor. If they output to "274c", then I will try converting the aperture file and import. 1. I am using Allegro v.15.7 and do not get the 274c option while importing artwork. Just 4x00, 6x00,RS274X,Barco DPF and Automatic. (see image below) 2. Do I select 6x00??? 3. Also, what is the command to run the perl translator script. I am using Cygwin shell. Thanks you for your reply!! Regards, Mark george.h.patrick@xxxxxxxxxxxxx<mailto:george.h.patrick@xxxxxxxxxxxxx> wrote: You can use Valor to translate RS-274x to RS-274c that Allegro can import easily. When you open the Export window, click the arrow in the Format box, and select "Gerber", not "Gerber274x". When you click apply, two files will be produced, he 274c gerber file(s) and dcodes.apr, the aperture table. If the gerber file suffix will be like .1p, .2n, etc. For a positive gerber only .1p will be produced. for a negative layer, RS-274c can't handle composites, so it will produce multiple files (.1p, .2n, etc) that represent the composites. The aperture file is in Valor format, I have attached a perl script that will translate it. -- George Patrick Tektronix, Inc. Central Engineering, EDS Applications Support P.O. Box 500, M/S 39-512 Beaverton, OR 97077-0001 * 503-627-5272 (voice) * 503-627-5587 (fax) http://www.tektronix.com<http://www.tektronix.com/> http://www.pcb-designer.com<http://www.pcb-designer.com/> "Off-Grid and Proud of it!" -----Original Message----- From: icu-pcb-forum-bounce@xxxxxxxxxxxxx [mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Mark Salberg Sent: Wednesday, May 14, 2008 04:11 To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: non allegro rs274x gerbers into allegro? Hello Dave...Uri...or anyone else out there in the group, We need to import Gerbers from a 3rd party RS-274X file into Allegro. I tried the Sourcelink with no success. Is there a Skill file available to convert these? I have attached two files: 1. layer01p.gbr (Original "Dazix" gerber file sent to fab) 2. sigt.gbx (Valor output of original gerber file) see #1 3. rs274x_fix.doc (Sourcelink instructions) Please reply if this is possible. I need to make thse changes in Allegro v.15.7 Regards, Mark Dave Elder wrote: Hi Dharma, Generally speaking it's not possible. Howver, I have written Skill code to translate Gerbers from several tools with some success. I generally need to customise the code each time I run it. Not fun! Cheers, Dave Dharma Kemp-Bresett wrote, On 4/04/2008 10:50 a.m.: Hi Everyone, Is there a way to get 274x gerbers output from some other CAD/CAM program to read into allegro? The general error I seem to be getting is "N codes not supported" I have tried everything I can think of and none of it is working. Some of you must have run into this before.....? Thanks in advance, Dharma KAW/USA Ltd. 39 Simon Street, #4 Nashua, NH 03060 603-886-8711 x212 603-881-8763 fax Confidentiality Notice: This email and any accompanying documents contain information that is confidential, privileged or exempt from disclosure under applicable law and is intended for the exclusive use of the addressee. This information is private and protected by law. If you are not the intended recipient, or have received this email in error, you are hereby notified that any disclosure, copying, distribution or use of the contents of this document in any manner is strictly prohibited. _____________________________________________________________________________ Scanned by IBM Email Security Management Services powered by MessageLabs. For more information please visit http://www.ers.ibm.com _____________________________________________________________________________ _____________________________________________________________________________ Scanned by IBM Email Security Management Services powered by MessageLabs. For more information please visit http://www.ers.ibm.com _____________________________________________________________________________ _____________________________________________________________________________ Scanned by IBM Email Security Management Services powered by MessageLabs. For more information please visit http://www.ers.ibm.com _____________________________________________________________________________