[PCB_FORUM] Re: nets shorted to gnd plane

Hi Sam,

We have had problems in the past with 274X formats where they will have nets 
shorted to planes.  You won't see the short in Allegro, but you can definitely 
view it in a gerber viewer and it is very random.  We currently use the 274D 
format and that works just fine, we just don't have the embedded apertures.  It 
is no big thing to the board house, they will use the photoplot.log that is 
generated for apertures.

Dale Rasmusen
CAD Manager
TEKNOVUS
________________________________
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of sjchar3@xxxxxxxxxxxx
Sent: Monday, July 20, 2009 12:54 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] nets shorted to gnd plane

Group, I sent gerbers out and board house pointed out nets were shorted to 
plane. I ran DRC and I didn't have nets shorted errors, this shouldn't be.

Sam

________________________________
A Good Credit Score is 700 or Above. See yours in just 2 easy 
steps!<http://pr.atwola.com/promoclk/100126575x1221323041x1201367261/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072%26hmpgID=62%26bcd=JulystepsfooterNO62>

Other related posts: