[PCB_FORUM] Re: nets shorted to gnd plane
- From: "CHRIS LANZA" <chris.lanza@xxxxxxxxxx>
- To: <icu-pcb-forum@xxxxxxxxxxxxx>
- Date: Mon, 20 Jul 2009 15:17:10 -0500
Welcome to the wonderful world of Allegro
________________________________
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of
sjchar3@xxxxxxxxxxxx
Sent: Monday, July 20, 2009 2:54 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] nets shorted to gnd plane
Group, I sent gerbers out and board house pointed out nets were shorted
to plane. I ran DRC and I didn't have nets shorted errors, this
shouldn't be.
Sam
________________________________
A Good Credit Score is 700 or Above. See yours in just 2 easy steps!
<http://pr.atwola.com/promoclk/100126575x1221323041x1201367261/aol?redir
=http://www.freecreditreport.com/pm/default.aspx?sc=668072%26hmpgID=62%2
6bcd=JulystepsfooterNO62>
Other related posts: