[PCB_FORUM] Re: multiple route

I don't know what your F6 function key was defined as, but here is a
workaround that Cadence helped us with a while back. It works in 14.2;
don't know about 15.1.  FYI, 15.2 has a much better multi-route
capability.

1) Ensure all clines to be routed end at the same horizontal or vertial
coordinate and there aren't any obstacles in the route path.
2) Type "set acon_oldcmd"
3) On options tab:
      - set active layer
      - set route type to "To cursor"
4) Click and drag cursor to create a box that covers the end of the
lines.
5) When done, type "unset acon_oldcmd"

Hope this helps.

-Randy
My opinion's my own, not my company's.


-----Original Message-----
From: Kevin McCowan [mailto:kmccowan@xxxxxxxxxxxxxx] 
Sent: Thursday, January 20, 2005 8:38 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: multiple route

I am curious.
Did you find a solution to this?
I tried to figure it out back when we had maintenance and my cadence guy
did not understand what I was asking.
Our maintenance ran out (a long story) and I never did get an answer. I
used the multi-route in Expedition and it worked kinda ok. I would like
to try it in Allegro but, like you, could not get it to work.
Or, anyone else?

Thanks,
Kevin McCowan
Sr. PCB Designer
TSI Telsys

Michael Ben-atar wrote:
> Hello eveyone
> i'm using 15.1 allegro.
> i would like to use multiple route by F6 .
> this option doesn't work ,can someone tell me what  i have to set on 
> my env to enable it.
> 
> michael
> thank you
> 
> -----------------------------------------------------------
> To subscribe/unsubscribe: 
>       Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
>       with a subject of subscribe or unsubscribe
> 
> To view the archives of this list please login at 
> http://www.freelists.org. Our list name is icu-pcb-forum or go to 
> http://www.freelists.org/archives/icu-pcb-forum/
> 
> Problems or Questions:
>       Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
> 
> Want to post a job listing ?  DON'T DO IT HERE!  
> Better yet, join our jobs listing forum.
> 
> SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
> POST:       icu-jobs-forum@xxxxxxxxxx
> -----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum or go to
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------
-----------------------------------------------------------
To subscribe/unsubscribe: 
        Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
        with a subject of subscribe or unsubscribe

To view the archives of this list please login at
http://www.freelists.org. Our list name is icu-pcb-forum
or go to http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
        Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx

Want to post a job listing ?  DON'T DO IT HERE!  
Better yet, join our jobs listing forum.

SUBSCRIBE:  icu-jobs-forum-subscribe@xxxxxxxxxx
POST:       icu-jobs-forum@xxxxxxxxxx
-----------------------------------------------------------

Other related posts: