[PCB_FORUM] Re: icu-pcb-forum Digest V4 #51

Unfortunately that is they way the programmers thought the tools should work.
It would have been too easy to have another gui open, that would allow you to
customize what you are bringing in, map it to the subclasses you want to see it
on, all in one set of commands.
scaling is usually a guess also, especially when dealing with mm and mils.

hcowles@xxxxxxxxxx




________________________________________________
Get your own "800" number
Voicemail, fax, email, and a lot more
http://www.ureach.com/reg/tag


---- On Fri, 7 Sep 2007, FreeLists Mailing List Manager (ecartis@xxxxxxxxxxxxx)
wrote:

icu-pcb-forum Digest    Fri, 07 Sep 2007        Volume: 04  Issue: 051

In This Issue:
                [PCB_FORUM] DXF problem

----------------------------------------------------------------------

From: "Chandrakanth Gajawada" 
Subject: [PCB_FORUM] DXF problem
Date: Fri, 7 Sep 2007 11:14:08 +0530

Hi Folks,
 

When I import DXF into PCB using File import DXF option, all the data in my
Database vanishes and I am left with only DXF in my board.

 

I generally export sub drawing of it and import back to my actual board
file. Please let me know why this happens.

 

I use PCB performance 15.5

 

Regards

Chandrakanth Gajawada




------------------------------

End of icu-pcb-forum Digest V4 #51
**********************************




-----------------------------------------------------------
To subscribe/unsubscribe: 
Send a message to icu-pcb-forum-request@xxxxxxxxxxxxx
with a subject of subscribe or unsubscribe

To view the archives of this list go to 
http://www.freelists.org/archives/icu-pcb-forum/

Problems or Questions:
Send an email to icu-pcb-forum-admins@xxxxxxxxxxxxx
-----------------------------------------------------------

Other related posts: