[PCB_FORUM] Re: finding line numbers

The characters are not the problem. I deleted some 2 and 3 pin headers on a 
page and i can now get a board. So i went back to orginal sch and deleted the 
same parts and it also works. Still don't understand why the connectors were 
giving me problems. I told Eng. to come up with some shorter names. Even some 
of the parts have 20 character pin names.
Thanks to everyone.
Sam 
 
-----Original Message-----
From: Bolman, Shirley H <shirley.h.bolman@xxxxxxxxx>
To: icu-pcb-forum@xxxxxxxxxxxxx
Sent: Thu, 27 Apr 2006 12:08:42 -0700
Subject: [PCB_FORUM] Re: finding line numbers


Thank You Carolyn.
I learned how to come up with net names back in the day when 8 characters was 
considered
enough for any situation. This is what I would have come up with back then: 
PX4V3FBB
Shirley in Oregon




From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of 
Carolyn.Schaefer@xxxxxxxxxx
Sent: Thursday, April 27, 2006 11:46 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: finding line numbers


Parentheses in netnames will cause problems - the + and . are probably not good 
either.  What Shirley suggests is very good.
 
Carolyn




From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Bolman, Shirley H
Sent: Thursday, April 27, 2006 11:28 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: finding line numbers


No wonder! I do believe there are some restricted characters. Someone needs to 
let the 
person who did the schematic that he doesn't need to write a novel when he 
comes up with
net names.
PCIE_X4_P3P3VAUX_FBASEB probably would be better. No special characters but it
still describes the signal.
 
Shirley in Oregon




From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of sjchar3@xxxxxxxxxxxx
Sent: Thursday, April 27, 2006 9:20 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: finding line numbers


Here is one net name, its choking on (I didn't do the sch)
 
PCIE_X4_(+)3.3VAUX_FROM_BASE_B 
 
-----Original Message-----
From: Bolman, Shirley H <shirley.h.bolman@xxxxxxxxx>
To: icu-pcb-forum@xxxxxxxxxxxxx
Sent: Thu, 27 Apr 2006 08:50:21 -0700
Subject: [PCB_FORUM] Re: finding line numbers


The net names don't have any spaces in them by any chance?
Shirley in Oregon




From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of sjchar3@xxxxxxxxxxxx
Sent: Thursday, April 27, 2006 6:53 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: finding line numbers


Group: Seems if i shorten net names the line errors jump to another line. I 
thought the net names could be up to 32 characters. Is this true? 
 
-----Original Message-----
From: Bolman, Shirley H <shirley.h.bolman@xxxxxxxxx>
To: icu-pcb-forum@xxxxxxxxxxxxx
Sent: Wed, 26 Apr 2006 14:26:36 -0700
Subject: [PCB_FORUM] Re: finding line numbers


Be sure you check the previous line or few lines. Most of the time when it 
reports an error on line XXX
it was because the previous line did not have the correct format i.e. ; :, etc
 
Shirley in Oregon




From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of sjchar3@xxxxxxxxxxxx
Sent: Wednesday, April 26, 2006 2:02 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: finding line numbers


Alan
Thanks, thats even better . Still can tell what kind of error i'm looking for.
 
Sam
 
-----Original Message-----
From: Ruprecht, Alan P @ DISPLAYS <alan.p.ruprecht@xxxxxxxxxx>
To: icu-pcb-forum@xxxxxxxxxxxxx
Sent: Wed, 26 Apr 2006 16:44:16 -0400
Subject: [PCB_FORUM] Re: finding line numbers


If your using OrCad go to File/Open/Text File
 
 
 



From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of sjchar3@xxxxxxxxxxxx
Sent: Wednesday, April 26, 2006 4:02 PM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] finding line numbers
 
Group: I get Error:Line 334 while running netlist. I know I've done this 
before, but notepad, wordpad and words do not give me line numbers. I remember 
setting up one of the programs to set up goto. Can someone refresh my memory on 
this?
 
Thanks Sam



Try the New Netscape Mail Today!
Virtually Spam-Free | More Storage | Import Your Contact List
http://mail.netscape.com 


Try the New Netscape Mail Today!
Virtually Spam-Free | More Storage | Import Your Contact List
http://mail.netscape.com 


Try the New Netscape Mail Today!
Virtually Spam-Free | More Storage | Import Your Contact List
http://mail.netscape.com 


Try the New Netscape Mail Today!
Virtually Spam-Free | More Storage | Import Your Contact List
http://mail.netscape.com 
___________________________________________________
Try the New Netscape Mail Today!
Virtually Spam-Free | More Storage | Import Your Contact List
http://mail.netscape.com

Other related posts: